Associate Professor Farshid Pahlevani

Associate Professor Farshid Pahlevani

Associate Professor
Science
Centre for Sustainable Materials Research & Technology (SMaRT)

Dr Farshid Pahlevani is an international expert on innovative solutions for waste challenges. His international research career, spanning high profile research institutes in Japan, Singapore and Australia, includes considerable experience working closely with industry to improve existing processes to achieve better environmental outcomes and greater cost efficiencies.

He has 6 international patents, more than 100 articles published worldwide and attracted millions of dollar research funding. His solutions enable manufacturing industries to save millions of dollars and turning their waste into resources.

He has been selected as the most innovative engineer of the year in 2020.

Farshid is an authority on high temperature metallurgical processes who has made a considerable contribution to the understanding of the behaviour of metallic materials at high temperatures and their interactions with other elements (including heat treatment and metal casting procedure).

He has joined UNSW in April 2015 as a process metallurgist with specialist research skills and knowledge to support the innovative efforts at the Centre for Sustainable Materials Research and Technology (SMaRT) to utilise waste as a resource in the production of a new generation of green materials/products. Since then, he has not only made considerable progress in incorporating waste into metals manufacturing, but he has successfully adapted and applied metallurgy knowledge to achieve the transformation of non-metallic wastes into green materials.

Over the years his primary focus has been on expanding his academic research efforts and working with industry partners to further the use of fundamental science within industrial applications. He has worked with several industries, published papers on process metallurgy in leading journals, and secured four patents which are currently licensed to five companies across Japan, South Korea, Thailand and Singapore.

Phone
+61 (2) 9065 7750
Location
Room 445, Hilmer Building E10
  • Book Chapters | 2018
    Maroufi ; Echeverria Encina C; Pahlevani ; Sahajwalla , 2018, 'Green Manufacturing: Unmaking Waste to Value Added Material', in Unmaking Waste in Production and Consumption: Towards Circular Economy, edn. First edition 2018, Emerald Publishing Limited, pp. 251 - 269
    Book Chapters | 2018
    Maroufi S; Echeverria CA; Pahlevani F; Sahajwalla V, 2018, 'Chapter 15 Green Manufacturing: From Waste to Value Added Materials', in Unmaking Waste in Production and Consumption: Towards the Circular Economy, Emerald Publishing Limited, pp. 261 - 279, http://dx.doi.org/10.1108/978-1-78714-619-820181021
    Book Chapters | 2018
    Maroufi S; Echeverria CA; Pahlevani F; Sahajwalla V, 2018, 'Green manufacturing: From waste to value added materials', in Crocker R; Saint C; Chen G; Tong Y (ed.), Unmaking Waste in Production and Consumption: Towards The Circular Economy, EMERALD GROUP PUBLISHING LTD, pp. 261 - 279, http://dx.doi.org/10.1108/978-1-78714-619-820181021
    Book Chapters | 2015
    Idapalapati S; Song X; Reddy V; Srikanth N; Pahlevani F; Narayanan KR; Zarinejad M, 2015, 'Materials in metal forming', in HandBook of Manufacturing Engineering and Technology, Springer, pp. 231 - 284, http://dx.doi.org/10.1007/978-1-4471-4670-4_42
    Book Chapters | 2014
    Pahlevani F; Idapalapati S; Song X; Venkata Reddy N; Narayanan KR; Zarinejad M, 2014, 'Materials in Metal Forming', in Nee A (ed.), Handbook of Manufacturing Engineering and Technology, Springer London, pp. 1 - 42, http://dx.doi.org/10.1007/978-1-4471-4976-7_42-1
    Book Chapters | 2006
    Pahlevani F; Endo Y; Yaokawa J; Itamura M; Kikuchi M; Nagasawa O; Anzai K, 2006, 'Development of Cup-Cast Method; Semi-Solid Slurry Preparation without External Stirring Force', in Solid State Phenomena, Trans Tech Publications Ltd., pp. 358 - 361, http://dx.doi.org/10.4028/3-908451-26-4.358
    Book Chapters | 2006
    Pahlevani F; Yaokawa J; Itamura M; Kikuchi M; Nagasawa O; Anzai K, 2006, 'Analytical Model for Heat Transfer Phenomena in Cup-Cast Method', in Solid State Phenomena, Trans Tech Publications Ltd., pp. 569 - 572, http://dx.doi.org/10.4028/3-908451-26-4.569
    Book Chapters |
    '10.4028/0-87849-408-1.1835', in Inactive DOIs, CrossRef, http://dx.doi.org/10.4028/0-87849-408-1.1835
  • Journal articles | 2023
    Hemati S; Biswal S; Pahlevani F; Udayakumar S; Sahajwalla V, 2023, 'Degradation Kinetics of Automotive Shredder Residue and Waste Automotive Glass for SiC Synthesis: An Energy-Efficient Approach', Crystals, 13, pp. 1183 - 1183, http://dx.doi.org/10.3390/cryst13081183
    Journal articles | 2023
    Hemati S; Udayakumar S; Wesley C; Biswal S; Nur-A-Tomal MS; Sarmadi N; Pahlevani F; Sahajwalla V, 2023, 'Thermal Transformation of Secondary Resources of Carbon-Rich Wastes into Valuable Industrial Applications', Journal of Composites Science, 7, pp. 8 - 8, http://dx.doi.org/10.3390/jcs7010008
    Journal articles | 2023
    Shang Z; Cai X; Wang H; Pahlevani F; Zheng Y; Yu Y; Zhang B; Feng P, 2023, 'High temperature anti-oxidation and filtration behavior of micro/nano-scale porous CoAl intermetallic synthesized via rapid thermal explosion', Corrosion Science, 219, http://dx.doi.org/10.1016/j.corsci.2023.111216
    Journal articles | 2023
    Wesley C; Jiang C; Pahlevani F; Doolan C; Heriyanto ; Sahajwalla V, 2023, 'Utilising the microstructure of chemically and thermally activated waste textiles for noise attenuation in an urban Australian context', Resources, Conservation and Recycling, 197, pp. 107112, http://dx.doi.org/10.1016/j.resconrec.2023.107112
    Journal articles | 2023
    Wesley C; Pahlevani F; Nur-A-Tomal S; Biswal S; Sahajwalla V, 2023, 'An investigation into the minimum energy requirements for transforming end-of-life cotton textiles into carbon fibre in an Australian context', Resources, Conservation and Recycling Advances, 17, pp. 200123 - 200123, http://dx.doi.org/10.1016/j.rcradv.2022.200123
    Journal articles | 2023
    Zarinejad M; Rimaz S; Tong Y; Wada K; Pahlevani F, 2023, 'Dependence of Mechanical Properties of Platinum-Rhodium Binary Alloys on Valence Electron Parameters', Johnson Matthey Technology Review, 67, pp. 290 - 299, http://dx.doi.org/10.1595/205651323X16527144808494
    Journal articles | 2022
    Babasafari Z; Pan AV; Pahlevani F; Moon SC; Du Toit M; Dippenaar R, 2022, 'Kinetics of Bainite Transformation in Multiphase High Carbon Low-Silicon Steel with and without Pre-Existing Martensite', Metals, 12, http://dx.doi.org/10.3390/met12111969
    Journal articles | 2022
    Echeverria C; Pahlevani F; Sahajwalla V, 2022, 'Effect of temperature, holding time and gas atmospheres in the synthesis and evolution of polymer-derived nanoceramics: A pyrometallurgical approach to precision nanorecycling of multiphase microplastics', Journal of Cleaner Production, 380, http://dx.doi.org/10.1016/j.jclepro.2022.134883
    Journal articles | 2022
    Javaheri V; Sadeghpour S; Karjalainen P; Lindroos M; Haiko O; Sarmadi N; Pallaspuro S; Valtonen K; Pahlevani F; Laukkanen A; Kömi J, 2022, 'Formation of nanostructured surface layer, the white layer, through solid particles impingement during slurry erosion in a martensitic medium-carbon steel', Wear, 496-497, http://dx.doi.org/10.1016/j.wear.2022.204301
    Journal articles | 2022
    Mansoorianfar M; Nabipour H; Pahlevani F; Zhao Y; Hussain Z; Hojjati-Najafabadi A; Hoang HY; Pei R, 2022, 'Recent progress on adsorption of cadmium ions from water systems using metal-organic frameworks (MOFs) as an efficient class of porous materials', Environmental Research, 214, pp. 114113, http://dx.doi.org/10.1016/j.envres.2022.114113
    Journal articles | 2022
    Nur-A-Tomal MS; Biswal S; Pahlevani F; Sahajwalla V, 2022, 'Recycling tannery solid wastes as an alternative carbon resource for ironmaking', Journal of Material Cycles and Waste Management, 24, pp. 2030 - 2040, http://dx.doi.org/10.1007/s10163-022-01465-y
    Journal articles | 2022
    Nur-A-Tomal MS; Pahlevani F; Sahajwalla V, 2022, 'Study on the Direct Transformation of Milk Bottle and Wood into Wood–Plastic Composite through Injection Molding', Journal of Composites Science, 6, pp. 230 - 230, http://dx.doi.org/10.3390/jcs6080230
    Journal articles | 2022
    Shang Z; Cai X; Jiao X; Zheng Y; Zhang B; Pahlevani F; Feng P, 2022, '3D microstructure and anti-oxidation behavior of porous CoAl intermetallic fabricated by rapid thermal explosion', Corrosion Science, 208, pp. 110715 - 110715, http://dx.doi.org/10.1016/j.corsci.2022.110715
    Journal articles | 2021
    Babasafari Z; Pan AV; Pahlevani F; Kong C; Du Toit M; Dippenaar R, 2021, 'Effect of Microstructural Features on Magnetic Properties of High-Carbon Steel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52, pp. 5107 - 5122, http://dx.doi.org/10.1007/s11661-021-06458-4
    Journal articles | 2021
    Babasafari Z; Pan AV; Pahlevani F; Kong C; Sahajwalla V; du Toit M; Dippenaar R, 2021, 'Effect of silicon and partitioning temperature on the microstructure and mechanical properties of high-carbon steel in a quenching and partitioning heat treatment', Journal of Materials Science, 56, pp. 15423 - 15440, http://dx.doi.org/10.1007/s10853-021-06270-w
    Journal articles | 2021
    Biswal S; Pahlevani F; Sahajwalla V, 2021, 'Synthesis of Value-Added Ferrous Material from Electric Arc Furnace (EAF) Slag and Spent Coffee Grounds', JOM, 73, pp. 1878 - 1888, http://dx.doi.org/10.1007/s11837-021-04678-y
    Journal articles | 2021
    Echeverria CA; Ozkan J; Pahlevani F; Willcox M; Sahajwalla V, 2021, 'Effect of hydrothermal hot-compression method on the antimicrobial performance of green building materials from heterogeneous cellulose wastes', Journal of Cleaner Production, 280, pp. 124377 - 124377, http://dx.doi.org/10.1016/j.jclepro.2020.124377
    Journal articles | 2021
    Echeverria CA; Pahlevani F; Lim S; Sahajwalla V, 2021, 'Synthesis and characterization of biomorphic 1D-SiC nanoceramics from novel macroalga precursor material', Journal of Cleaner Production, 312, pp. 127808 - 127808, http://dx.doi.org/10.1016/j.jclepro.2021.127808
    Journal articles | 2021
    Handoko W; Pahlevani F; Yao Y; Privat K; Sahajwalla V, 2021, 'Characterization of Waste-Integrated Multi-hybrid Structure for Enhancing Corrosion Resistance of High-Carbon Steel', Journal of Sustainable Metallurgy, 7, pp. 166 - 177, http://dx.doi.org/10.1007/s40831-020-00330-2
    Journal articles | 2021
    Khayyam Nekouei R; Tudela I; Mofarah SS; Vahidi E; Maroufi S; Wang K; Pahlevani F; Sahajwalla V, 2021, 'Dual functionality of mixed Cu-based two-dimensional (2D) heterostructures derived from electronic waste', Green Chemistry, 23, pp. 5511 - 5523, http://dx.doi.org/10.1039/d1gc00354b
    Journal articles | 2021
    Nur-A-Tomal MS; Pahlevani F; Handoko W; Cholake ST; Sahajwalla V, 2021, 'Effect of cyclic reprocessing on nylon 12 under injection molding: working toward more efficient recycling of plastic waste', Materials Today Sustainability, 11-12, pp. 100056 - 100056, http://dx.doi.org/10.1016/j.mtsust.2020.100056
    Journal articles | 2021
    Rezaei M; Zarei-Hanzaki A; Anousheh AS; Abedi HR; Pahlevani F; Hossain R; Sahajwalla V; Berto F, 2021, 'On the damage mechanisms during compressive dwell-fatigue of β-annealed Ti-6242S alloy', International Journal of Fatigue, 146, http://dx.doi.org/10.1016/j.ijfatigue.2021.106158
    Journal articles | 2021
    Zarinejad M; Wada K; Pahlevani F; Katal R; Rimaz S, 2021, 'Martensite and reverse transformation temperatures of TiAu-based and TiIr-based intermetallics', Journal of Alloys and Compounds, 870, pp. 159399 - 159399, http://dx.doi.org/10.1016/j.jallcom.2021.159399
    Journal articles | 2021
    Zarinejad M; Wada K; Pahlevani F; Katal R; Rimaz S, 2021, 'Valence Electron Ratio for Design of Shape Memory Alloys with Desired Phase Transformation Temperatures', Shape Memory and Superelasticity, 7, pp. 179 - 189, http://dx.doi.org/10.1007/s40830-021-00319-0
    Journal articles | 2020
    Babasafari Z; Pan AV; Pahlevani F; Hossain R; Sahajwalla V; Du Toit M; Dippenaar R, 2020, 'Effects of austenizing temperature, cooling rate and isothermal temperature on overall phase transformation characteristics in high carbon steel', Journal of Materials Research and Technology, 9, pp. 15286 - 15297, http://dx.doi.org/10.1016/j.jmrt.2020.10.071
    Journal articles | 2020
    Biswal S; Pahlevani F; Bhattacharyya SK; Sahajwalla V, 2020, 'A novel reforming approach of utilizing spent coffee grounds to produce iron', Resources, Conservation and Recycling, 163, pp. 105067 - 105067, http://dx.doi.org/10.1016/j.resconrec.2020.105067
    Journal articles | 2020
    Biswal S; Pahlevani F; Sahajwalla V, 2020, 'Wastes as resources in steelmaking industry — current trends', Current Opinion in Green and Sustainable Chemistry, 26, pp. 100377 - 100377, http://dx.doi.org/10.1016/j.cogsc.2020.100377
    Journal articles | 2020
    Echeverria C; Ozkan J; Pahlevani F; Willcox M; Sahajwalla V, 2020, 'Multifunctional marine bio-additive with synergistic effect for non-toxic flame-retardancy and anti-microbial performance', Sustainable Materials and Technologies, 25, http://dx.doi.org/10.1016/j.susmat.2020.e00199
    Journal articles | 2020
    Echeverria CA; Pahlevani F; Sahajwalla V, 2020, 'Valorisation of discarded nonwoven polypropylene as potential matrix-phase for thermoplastic-lignocellulose hybrid material engineered for building applications', Journal of Cleaner Production, 258, http://dx.doi.org/10.1016/j.jclepro.2020.120730
    Journal articles | 2020
    Handoko W; Pahlevani F; Sahajwalla V, 2020, 'Comparison on corrosion performance of waste-based multi-hybrid structure high carbon steel and high Cr cast steel', SN Applied Sciences, 2, http://dx.doi.org/10.1007/s42452-020-03629-7
    Journal articles | 2020
    Haque E; Pahlevani F; Gorjizadeh N; Hossain R; Sahajwalla V, 2020, 'Thermal transformation of end-of-life latex to valuable materials', Journal of Composites Science, 4, http://dx.doi.org/10.3390/jcs4040166
    Journal articles | 2020
    Hossain R; Pahlevani F; Sahajwalla V, 2020, 'Revealing the mechanism of extraordinary hardness without compensating the toughness in a low alloyed high carbon steel', Scientific Reports, 10, pp. 181, http://dx.doi.org/10.1038/s41598-019-55803-6
    Journal articles | 2020
    Kan WH; Huang S; Man Z; Handoko W; Chang L; Pahlevani F; Rasmussen K; Sahajwalla V, 2020, 'Utilization of Waste Materials for the Manufacturing of Better-Quality Wear and Corrosion-Resistant Steels', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51, pp. 2404 - 2410, http://dx.doi.org/10.1007/s11661-020-05686-4
    Journal articles | 2020
    Khayyam Nekouei R; Tudela I; Pahlevani F; Sahajwalla V, 2020, 'Current trends in direct transformation of waste printed circuit boards (WPCBs) into value-added materials and products', Current Opinion in Green and Sustainable Chemistry, 24, pp. 14 - 20, http://dx.doi.org/10.1016/j.cogsc.2020.01.003
    Journal articles | 2020
    Nekouei RK; Maroufi S; Assefi M; Pahlevani F; Sahajwalla V, 2020, 'Thermal isolation of a clean alloy from waste slag and polymeric residue of electronic waste', Processes, 8, pp. 53 - 53, http://dx.doi.org/10.3390/pr8010053
    Journal articles | 2020
    Nur-A-Tomal MS; Pahlevani F; Sahajwalla V, 2020, 'Direct transformation of waste children's toys to high quality products using 3D printing: A waste-to-wealth and sustainable approach', Journal of Cleaner Production, 267, pp. 122188 - 122188, http://dx.doi.org/10.1016/j.jclepro.2020.122188
    Journal articles | 2020
    Tanaka Y; Pahlevani F; Kitamura SY; Privat K; Sahajwalla V, 2020, 'Behaviour of Sulphide and Non-alumina-Based Oxide Inclusions in Ca-Treated High-Carbon Steel', Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 51, pp. 1384 - 1394, http://dx.doi.org/10.1007/s11663-020-01872-2
    Journal articles | 2019
    Banerjee A; Gangadhara Prusty B; Zhu Q; Pahlevani F; Sahajwalla V, 2019, 'Strain-Rate-Dependent Deformation Behavior of High-Carbon Steel under Tensile–Compressive Loading', JOM, 71, pp. 2757 - 2769, http://dx.doi.org/10.1007/s11837-019-03594-6
    Journal articles | 2019
    Banerjee A; Hossain R; Pahlevani F; Zhu Q; Sahajwalla V; Prusty BG, 2019, 'Strain-rate-dependent deformation behaviour of high-carbon steel in compression: mechanical and structural characterisation', Journal of Materials Science, 54, pp. 6594 - 6607, http://dx.doi.org/10.1007/s10853-018-03301-x
    Journal articles | 2019
    Echeverria C; Handoko W; Pahlevani F; Sahajwalla V, 2019, 'Cascading use of textile waste for the advancement of fibre reinforced composites for building applications', Journal of Cleaner Production, 208, pp. 1524 - 1536, http://dx.doi.org/10.1016/j.jclepro.2018.10.227
    Journal articles | 2019
    Echeverria C; Pahlevani F; Sahajwalla V, 2019, 'Mechanical particle size reduction methods as potential interfacial optimization alternative for a low-carbon particulate reinforced marine bio-composite', Journal of Cleaner Production, 221, pp. 509 - 525, http://dx.doi.org/10.1016/j.jclepro.2019.02.265
    Journal articles | 2019
    Echeverria Encina C; Handoko W; Pahlevani F; Jiang C; Doolan C; Sahajwalla V, 2019, 'Engineered hybrid fibre reinforced composites for sound absorption building applications', Resources, Conservation and Recycling, 143, pp. 1 - 14, http://dx.doi.org/10.1016/j.resconrec.2018.12.014
    Journal articles | 2019
    Handoko W; Anurag A; Pahlevani F; Hossain R; Privat K; Sahajwalla V, 2019, 'Effect of selective-precipitations process on the corrosion resistance and hardness of dual-phase high-carbon steel', Scientific Reports, 9, pp. 15631, http://dx.doi.org/10.1038/s41598-019-52228-z
    Journal articles | 2019
    Handoko W; Pahlevani F; Hossain R; Sahajwalla V, 2019, 'Stress-Induced Phase Transformation and Its Correlation with Corrosion Properties of Dual-Phase High Carbon Steel', Journal of Manufacturing and Materials Processing, 3, pp. 55 - 55, http://dx.doi.org/10.3390/jmmp3030055
    Journal articles | 2019
    Handoko W; Pahlevani F; Sahajwalla V, 2019, 'Effect of austenitisation temperature on corrosion resistance properties of dual-phase high-carbon steel', Journal of Materials Science, http://dx.doi.org/10.1007/s10853-019-03859-0
    Journal articles | 2019
    Handoko W; Pahlevani F; Sahajwalla V, 2019, 'Enhancing corrosion resistance of high-carbon steel by formation of surface layers using wastes as input', Metals, 9, http://dx.doi.org/10.3390/met9080902
    Journal articles | 2019
    Handoko W; Pahlevani F; Yao Y; Privat K; Sahajwalla V, 2019, 'From Waste to Multi-Hybrid Layering of High Carbon Steel to Improve Corrosion Resistance: An In-Depth Analysis Using EPMA and AFM Techniques', Surfaces, http://dx.doi.org/10.3390/surfaces2030036
    Journal articles | 2019
    Heriyanto ; Pahlevani F; Sahajwalla V, 2019, 'Effect of different waste filler and silane coupling agent on the mechanical properties of powder-resin composite', Journal of Cleaner Production, 224, pp. 940 - 956, http://dx.doi.org/10.1016/j.jclepro.2019.03.269
    Journal articles | 2019
    Heriyanto ; Pahlevani F; Sahajwalla V, 2019, 'Effect of glass aggregates and coupling agent on the mechanical behaviour of polymeric glass composite', Journal of Cleaner Production, 227, pp. 119 - 129, http://dx.doi.org/10.1016/j.jclepro.2019.04.152
    Journal articles | 2019
    Hossain R; Pahlevani F; Cholake ST; Privat K; Sahajwalla V, 2019, 'Innovative Surface Engineering of High-Carbon Steel through Formation of Ceramic Surface and Diffused Subsurface Hybrid Layering', ACS Sustainable Chemistry and Engineering, 7, pp. 9228 - 9236, http://dx.doi.org/10.1021/acssuschemeng.9b00051
    Journal articles | 2019
    Hossain R; Pahlevani F; Sahajwalla V, 2019, 'Stability of retained austenite in high carbon steel – Effect of post-tempering heat treatment', Materials Characterization, 149, pp. 239 - 247, http://dx.doi.org/10.1016/j.matchar.2019.01.034
    Journal articles | 2019
    Hossain R; Pahlevani F; Sahajwalla V, 2019, 'Surface modification of high carbon steel through microstructural engineering', Materials Characterization, 148, pp. 116 - 122, http://dx.doi.org/10.1016/j.matchar.2018.12.020
    Journal articles | 2019
    Khayyam Nekouei R; Pahlevani F; Golmohammadzadeh R; Assefi M; Rajarao R; Chen YH; Sahajwalla V, 2019, 'Recovery of heavy metals from waste printed circuit boards: statistical optimization of leaching and residue characterization', Environmental Science and Pollution Research, 26, pp. 24417 - 24429, http://dx.doi.org/10.1007/s11356-019-05596-y
    Journal articles | 2019
    Khayyam Nekouei R; Pahlevani F; Mayyas M; Maroufi S; Sahajwalla V, 2019, 'Direct transformation of waste printed circuit boards into high surface area t-SnO2 for photocatalytic dye degradation', Journal of Environmental Chemical Engineering, 7, http://dx.doi.org/10.1016/j.jece.2019.103133
    Journal articles | 2019
    Nekouei RK; Pahlevani F; Assefi M; Maroufi S; Sahajwalla V, 2019, 'Selective isolation of heavy metals from spent electronic waste solution by macroporous ion-exchange resins', Journal of Hazardous Materials, 371, pp. 389 - 396, http://dx.doi.org/10.1016/j.jhazmat.2019.03.013
    Journal articles | 2019
    Singla I; Kumar H; Pahlevani F; Handoko W; Cholake ST; Hossain R; Sahajwalla V, 2019, 'From waste to surface modification of aluminum bronze using selective surface diffusion process', Scientific Reports, 9, pp. 1559, http://dx.doi.org/10.1038/s41598-018-38120-2
    Journal articles | 2019
    Tanaka Y; Pahlevani F; Moon SC; Dippenaar R; Sahajwalla V, 2019, 'In situ characterisation of MnS precipitation in high carbon steel', Scientific Reports, 9, pp. 10096, http://dx.doi.org/10.1038/s41598-019-46450-y
    Journal articles | 2018
    Cholake S; Pahlevani F; Gaikwad V; Millicer H; Sahajwalla V, 2018, 'Cost-effective and sustainable approach to transform end-of-life vinyl banner to value added product', Resources, Conservation and Recycling, 136, pp. 9 - 21, http://dx.doi.org/10.1016/j.resconrec.2018.03.025
    Journal articles | 2018
    Handoko W; Pahlevani F; Sahajwalla V, 2018, 'Enhancing Corrosion Resistance and Hardness Properties of Carbon Steel through Modification of Microstructure', materials, 11, http://dx.doi.org/10.3390/ma11122404
    Journal articles | 2018
    Handoko W; Pahlevani F; Sahajwalla V, 2018, 'The Effect of Low-Quantity Cr Addition on the Corrosion Behaviour of Dual-Phase High Carbon Steel', Metals, 8, pp. 1 - 12, http://dx.doi.org/10.3390/met8040199
    Journal articles | 2018
    Heriyanto ; Pahlevani F; Sahajwalla V, 2018, 'From waste glass to building materials – An innovative sustainable solution for waste glass', Journal of Cleaner Production, 191, pp. 192 - 206, http://dx.doi.org/10.1016/j.jclepro.2018.04.214
    Journal articles | 2018
    Heriyanto ; Pahlevani F; Sahajwalla V, 2018, 'Synthesis of calcium silicate from selective thermal transformation of waste glass and waste shell', Journal of Cleaner Production, 172, pp. 3019 - 3027, http://dx.doi.org/10.1016/j.jclepro.2017.11.109
    Journal articles | 2018
    Heriyanto ; Pahlevani F; Sahajwalla V, 2018, 'Waste glass powder – Innovative value-adding resource for hybrid wood-based products', Journal of Cleaner Production, 195, pp. 215 - 225, http://dx.doi.org/10.1016/j.jclepro.2018.05.205
    Journal articles | 2018
    Hossain R; Pahlevani F; Sahajwalla V, 2018, 'Evolution of Microstructure and Hardness of High Carbon Steel under Different Compressive Strain Rates', Metals, 8, http://dx.doi.org/10.3390/met8080580
    Journal articles | 2018
    Karbalaei Mirza Shahrbabaki Z; Pahlevani F; Gorjizadeh N; Hossain R; Ghasemian M; Gaikwad V; Sahajwalla V, 2018, 'Direct Transformation of Metallized Paper into Al-Si Nano-Rod and Al Nano-Particles Using Thermal Micronizing Technique', Materials, 11, pp. 1964 - 1964, http://dx.doi.org/10.3390/ma11101964
    Journal articles | 2018
    Nekouei R; Pahlevani F; Rajarao R; Golmohammadzadeh R; Sahajwalla V, 2018, 'Two-step pre-processing enrichment of waste printed circuit boards: Mechanical milling and physical separation', Journal of Cleaner Production, 184, pp. 1113 - 1124, http://dx.doi.org/10.1016/j.jclepro.2018.02.250
    Journal articles | 2018
    Nekouei R; Pahlevani F; Rajarao R; Gomohammadzadeh R; Sahajwalla V, 2018, 'Direct transformation of waste printed circuit boards to nano-structured powders through mechanical alloying', Materials and Design, 141, pp. 26 - 36, http://dx.doi.org/10.1016/j.matdes.2017.12.032
    Journal articles | 2018
    Roy H; Pahlevani F; Cholake S; Echeverria C; Banerjee A; Sahajwalla V, 2018, 'Simulation of Marine Bio-Composite Using Empirical Data Combined with Finite Element Technique', journal of composite science, 2, pp. 48 - 48, http://dx.doi.org/10.3390/jcs2030048
    Journal articles | 2018
    Tanaka Y; Pahlevani F; Privat K; Moon S; Dippenaar R; Kitamura S; Sahajwalla V, 2018, 'Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation', Metallurgical and Materials Transactions B, 49, pp. 2986 - 2997, http://dx.doi.org/10.1007/s11663-018-1394-5
    Journal articles | 2018
    Tanaka Y; Pahlevani F; Sahajwalla V, 2018, 'Agglomeration Behavior of Non-Metallic Particles on the Surface of Ca-Treated High-Carbon Liquid Steel: An In Situ Investigation', Metals, 8, http://dx.doi.org/10.3390/met8030176
    Journal articles | 2018
    Yin S; Rajarao R; Pahlevani F; Sahajwalla V, 2018, 'Sustainable Steel Carburization by Using Snack Packaging Plastic Waste as Carbon Resources', Metals, 8, http://dx.doi.org/10.3390/met8010078
    Journal articles | 2017
    Echeverria C; Pahlevani F; Gaikwad V; Sahajwalla V, 2017, 'The effect of microstructure, filler load and surface adhesion of marine bio-fillers, in the performance of Hybrid Wood-Polypropylene Particulate Bio-composite', Journal of Cleaner Production, 154, pp. 284 - 294, http://dx.doi.org/10.1016/j.jclepro.2017.04.020
    Journal articles | 2017
    Gaikwad V; Kumar U; Pahlevani F; Piadasa A; Sahajwalla V, 2017, 'Thermal Transformation of Waste Toner Powder into a Value-Added Ferrous Resource', ACS Sustainable Chemistry and Engineering, 5, pp. 11543 - 11550, http://dx.doi.org/10.1021/acssuschemeng.7b02875
    Journal articles | 2017
    Gorjizadeh N; Pahlevani F; Sahajwalla V, 2017, 'Metallised plastic waste as a new resource – Study of electronic structure and chemical bond', Journal of Materials and Environmental Sciences, 8, pp. 1599 - 1606, http://www.jmaterenvironsci.com/Document/vol8/vol8_N5/170-JMES-2676-Gorjizadeh.pdf
    Journal articles | 2017
    Handoko W; Pahlevani F; Sahajwalla V, 2017, 'Corrosion behaviour of dual-phase high carbon steel – Microstructure influence', Journal of Manufacturing and Materials Processing, 1, http://dx.doi.org/10.3390/jmmp1020021
    Journal articles | 2017
    Hemraj DA; Hossain A; Ye Q; Qin JG; Leterme SC, 2017, 'Anthropogenic shift of planktonic food web structure in a coastal lagoon by freshwater flow regulation', SCIENTIFIC REPORTS, 7, http://dx.doi.org/10.1038/srep44441
    Journal articles | 2017
    Hossain R; Pahlevani F; Witteveen E; Banerjee A; Joe B; Prusty G; Dippenaar R; Sahajwalla V, 2017, 'Hybrid structure of white layer in high carbon steel – Formation mechanism and its properties', Scientific Reports, 7, http://dx.doi.org/10.1038/s41598-017-13749-7
    Journal articles | 2017
    Mayyas M; Pahlevani F; Bucknall M; Maroufi S; You Y; Liu Z; Sahajwalla V, 2017, 'Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons as a Process Byproduct', ACS Sustainable Chemistry and Engineering, 5, pp. 5440 - 5448, http://dx.doi.org/10.1021/acssuschemeng.7b00774
    Journal articles | 2017
    Mayyas M; Pahlevani F; Maroufi S; Liu Z; Sahajwalla V, 2017, 'Waste conversion into high-value ceramics: Carbothermal nitridation synthesis of titanium nitride nanoparticles using automotive shredder waste', Journal of Environmental Management, 188, pp. 32 - 42, http://dx.doi.org/10.1016/j.jenvman.2016.11.079
    Journal articles | 2017
    Pahlevani F; Hossain R; Sahajwalla V, 2017, 'Effect of small addition of Cr on stability of retained austenite in high carbon steel', Materials characterization, 125, pp. 114 - 122, http://dx.doi.org/10.1016/j.matchar.2017.02.001
    Journal articles | 2017
    Pahlevani F; 盾 八; 浩一 安; 正行 板; 政男 菊; 理 長; 英輔 新, 2017, '半凝固体の組織に及ぼす鋳造条件の影響', , pp. 83 - 83, http://dx.doi.org/10.11279/jfeskouen.146_83
    Journal articles | 2017
    Shokri A; Pahlevani F; Cole I; Sahajwalla V, 2017, 'Selective thermal transformation of old computer printed circuit boards to Cu-Sn based alloy', Journal of Environmental Management, 199, pp. 7 - 12, http://dx.doi.org/10.1016/j.jenvman.2017.05.028
    Journal articles | 2017
    Shokri A; Pahlevani F; Levick K; Cole I; Sahajwalla V, 2017, 'Synthesis of copper-tin nanoparticles from old computer printed circuit boards', Journal of Cleaner Production, 142, pp. 2586 - 2592, http://dx.doi.org/10.1016/j.jclepro.2016.11.017
    Journal articles | 2017
    健太郎 海; Pahlevani F; 雄一 遠; 盾 八; 浩一 安; 政男 菊; 理 長; 正行 板, 2017, 'カップ条件が半凝固スラリー品質に及ぼす影響', , pp. 133 - 133, http://dx.doi.org/10.11279/jfeskouen.148_133
    Journal articles | 2017
    盾 八; 健太郎 海; 雄太 志; Pahlevani F; 浩一 安; 正行 板; 理 長; 政男 菊, 2017, 'カップを用いた迅速スラリー製造法におけるスラリー温度の過渡特性', , pp. 83 - 83, http://dx.doi.org/10.11279/jfeskouen.150_83
    Journal articles | 2016
    Handoko W; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Transforming automotive waste into TiN and TiC ceramics', Materials Letters, 176, pp. 17 - 20, http://dx.doi.org/10.1016/j.matlet.2016.04.066
    Journal articles | 2016
    Hossain R; Pahlevani F; Quadir MZ; Sahajwalla V, 2016, 'Stability of retained austenite in high carbon steel under compressive stress: An investigation from macro to nano scale', Scientific Reports, 6, http://dx.doi.org/10.1038/srep34958
    Journal articles | 2016
    Mayyas M; Mayyas M; Pahlevani F; Liu Z; Rajarao R; Sahajwalla V, 2016, 'From automotive shredder residue to nano-ceramics and graphitic carbon—Thermal degradation kinetics', Journal of Analytical and Applied Pyrolysis, 120, pp. 60 - 74, http://dx.doi.org/10.1016/j.jaap.2016.04.010
    Journal articles | 2016
    Mayyas M; Pahlevani F; Handoko W; Sahajwalla V, 2016, 'Preliminary investigation on the thermal conversion of automotive shredder residue into value-added products: Graphitic carbon and nano-ceramics', Waste Management, 50, pp. 173 - 183, http://dx.doi.org/10.1016/j.wasman.2016.02.003
    Journal articles | 2016
    Molkeri A; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Thermal and mechanical stability of retained austenite in high carbon steel: An in-situ investigation', Materials Letters, 163, pp. 209 - 213, http://dx.doi.org/10.1016/j.matlet.2015.10.083
    Journal articles | 2016
    Pahlevani F; Dippenaar R; Gorjizadeh N; Cholake ST; Hossain R; Kumar R; Sahajwalla V, 2016, 'Surface Modification of Steel Using Automotive Waste as Raw Materials', Procedia Manufacturing, 7, pp. 387 - 394, http://dx.doi.org/10.1016/j.promfg.2016.12.007
    Journal articles | 2016
    Pahlevani F; Kumar R; Gorjizadeh N; Hossain R; Cholake ST; Privat K; Sahajwalla V, 2016, 'Enhancing steel properties through in situ formation of ultrahard ceramic surface', Scientific Reports, 6, http://dx.doi.org/10.1038/srep38740
    Journal articles | 2016
    Sahajwalla V; Pahlevani F; Maroufi S; Rajarao R, 2016, 'Green Manufacturing: A Key to Innovation Economy', Journal of Sustainable Metallurgy, 2, pp. 273 - 275, http://dx.doi.org/10.1007/s40831-016-0087-z
    Journal articles | 2014
    Kitamura SY; Ito K; Pahlevani F; Mori M, 2014, 'Development of simulation model for hot metal dephosphorization process', Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 100, pp. 491 - 499, http://dx.doi.org/10.2355/tetsutohagane.100.491
    Journal articles | 2014
    Kitamura SY; Pahlevani F, 2014, 'Process simulation of dephosphorization treatment of hot metal with high phosphorus content', Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 100, pp. 500 - 508, http://dx.doi.org/10.2355/tetsutohagane.100.500
    Journal articles | 2011
    Pahlevani F; Shibata H; Maruoka N; Kitamura SY; Inoue R, 2011, 'Behavior of vanadium and niobium during hot metal dephosphorization by CaO-SiO2-FetO slag', ISIJ International, 51, pp. 1624 - 1630, http://dx.doi.org/10.2355/isijinternational.51.1624
    Journal articles | 2010
    Pahlevani F; Kitamura S-Y; Shibata H; Maruoka N, 2010, 'Distribution of P2O5 between Solid Solution of 2CaO center dot SiO2-3CaO center dot P2O5 and Liquid Phase', ISIJ INTERNATIONAL, 50, pp. 822 - 829, http://dx.doi.org/10.2355/isijinternational.50.822
    Journal articles | 2010
    Pahlevani F; Kitamura S; Shibata H; Maruoka N, 2010, 'Simulation of steel refining process in converter', Steel Research International, 81, pp. 617 - 622, http://dx.doi.org/10.1002/srin.201000053
    Journal articles | 2010
    Pahlevani F; Kitamura SY; Shibata H; Maruoka N, 2010, 'Distribution of P2O5 between Solid Solution of 2CaO.Si02-3CaO.P2O5 and Liquid Phase', ISIJ International, 50, pp. 822 - 829, http://dx.doi.org/10.2355/isijinternational.50.822
    Journal articles | 2008
    Nili-Ahmadabadi M; Pahlevani F; Babaghorbani P, 2008, 'Effect of Slope Plate Variable and Reheating on the Semi-Solid Structure of Ductile Cast Iron', Tsinghua Science and Technology, 13, pp. 147 - 151, http://dx.doi.org/10.1016/S1007-0214(08)70026-9
    Journal articles | 2008
    Nili-Ahmadabadi M; Pahlevani F; Babaghorbani P, 2008, 'Effect of slope plate variable and reheating on the semi-solid structure of ductile cast iron', Tsinghua Science and Technology, 13, pp. 147 - 151, http://dx.doi.org/10.1109/tst.2008.6071860
    Journal articles | 2008
    Nili-Ahmadabadi M; Pahlevani F; Babaghorbani P, 2008, 'Effects of slope plate variable and reheating on semi-solid structure of ductile cast iron', China Foundry, 5, pp. 36 - 38
    Journal articles | 2008
    Pahlevani F; Anzai K; Niyama E, 2008, 'Quick semi-solid slurry making method using metallic cup', Solid State Phenomena, 141-143, pp. 463 - 468, http://dx.doi.org/10.4028/www.scientific.net/ssp.141-143.463
    Journal articles | 2008
    Yaokawa J; Pahlevani F; Anzai K; Viriyarattanasak P; Itamura M, 2008, 'Temperature Distribution in AC4CH Aluminum Alloy Slurry Made in Metallic Vessel', Journal of Japan Foundry Engineering Society, 80, pp. 156 - 163, http://dx.doi.org/10.11279/jfes.80.156
    Journal articles | 2007
    Pahlevani F; Yaokawa J; Anzai K; Niyama E, 2007, 'Theoretical considerations for thermal control over solid fraction of aluminum alloy slurry prepared by cup-cast method', Materials Transactions, 48, pp. 2297 - 2303, http://dx.doi.org/10.2320/matertrans.MB200751
    Journal articles | 2006
    Pahlevani F; Endo Y; Yaokawa J; Itamura M; Kikuchi M; Nagasawa O; Anzai K, 2006, 'Development of cup-cast method; semi-solid slurry preparation without external stirring force', Solid State Phenomena, 116-117, pp. 358 - 361, http://dx.doi.org/10.4028/www.scientific.net/SSP.116-117.358
    Journal articles | 2006
    Pahlevani F; Yaokawa J; Anzai K, 2006, 'Investigation of heat transfer in the cup-cast method by experiment, and analytical method', WIT Transactions on Engineering Sciences, 53, pp. 249 - 258, http://dx.doi.org/10.2495/HT060251
    Journal articles | 2006
    Pahlevani F; Yaokawa J; Anzai K, 2006, 'Semi-solid slurry preparation without additional stirring, cup-cast method', Materials Science Forum, 519-521, pp. 1835 - 1840, http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.1835
    Journal articles | 2006
    Pahlevani F; Yaokawa J; Itamura M; Kikuchi M; Nagasawa O; Anzai K, 2006, 'Analytical model for heat transfer phenomena in cup-cast method', Solid State Phenomena, 116-117, pp. 569 - 572, http://dx.doi.org/10.4028/www.scientific.net/SSP.116-117.569
    Journal articles | 2004
    Pahlevani F; Nili-Ahmadabadi M, 2004, 'Development of semi-solid ductile cast iron', International Journal of Cast Metals Research, 17, pp. 157 - 161, http://dx.doi.org/10.1179/136404604225020560
    Journal articles | 2003
    Pahlevani F; Nili Ahmadabadi M, 2003, 'Review on Semi-solid metal casting and processing', Iranian Journal of cast metal, 4, pp. 1 - 20
    Journal articles | 2003
    Pahlevani F; Nili Ahmadabadi M, 2003, 'Semi-solid casting by slope plate method', Iranian journal of cast metal, 2, pp. 30 - 34
    Journal articles | 2003
    Pahlevani F; Salarfar S; Nili Ahmadabadi M, 2003, 'Dendritic-globular structure transition of ductile iron in semi-solid casting using cooling slope plate', Journal of material engineering association, 6, pp. 45 - 49
    Journal articles | 2002
    Pahlevani F, 2002, 'Semi-sloid casting by mechanical stirring method', Iranian journal of cast metal, 3, pp. 23 - 28
  • Other | 2018
    Echeverria C; Gaikwad V; Pahlevani F; Sahajwalla V, 2018, The effect of microstructure, filler load and surface adhesion of marine bio-fillers, in the performance of Hybrid Wood-Polypropylene Particulate Bio-composite, , https://advanceseng.com/materials-engineering/effect-microstructure-filler-load-surface-adhesion-marine-bio-fillers-performance-hybrid-wood-polypropylene-particulate-bio-composite/
    Conference Papers | 2018
    Echeverria Encina CA; Pahlevani ; Sahajwalla , 2018, 'Interphase-interface characterization of novel engineered bio-composite systems with Scanning Electron Microscopy', in Interphase-interface characterization of novel engineered bio-composite systems with Scanning Electron Microscopy, 19th International Microscopy Congress, International Convention Centre (ICC), Sydney Australia, presented at 19th International Microscopy Congress, International Convention Centre (ICC), Sydney Australia, 09 September 2018 - 14 September 2018
    Conference Papers | 2018
    Handoko W; Pahlevani F; Sahajwalla V, 2018, 'Effect of Retained Austenite Stability in Corrosion Mechanism of Dual Phase High Carbon Steel', in Effect of Retained Austenite Stability in Corrosion Mechanism of Dual Phase High Carbon Steel, 20th International Conference on Sustainable Materials and Structural Systems, Amsterdam, Netherlands, presented at 20th International Conference on Sustainable Materials and Structural Systems, Amsterdam, Netherlands, 22 January 2018 - 23 January 2018
    Conference Papers | 2018
    Handoko W; Pahlevani F; Sahajwalla V, 2018, 'Effect of Retained Austenite Stability in Corrosion Mechanism of Dual Phase High Carbon Steel', in International journal of materials and metallurgical Engineering, http://dx.doi.org/10.1999/1307-6892/10008308
    Conference Papers | 2018
    Handoko W; Pahlevani F; Singla I; Kumar H; Sahajwalla V, 2018, 'Waste-Based Surface Modification to Enhance Corrosion Resistance of Aluminium Bronze Alloy', in International Journal of Chemical & Material Science, IJSER, pp. 661 - 665, https://waset.org/publications/10009894/waste-based-surface-modification-to-enhance-corrosion-resistance-of-aluminium-bronze-alloy
    Conference Papers | 2018
    Hossain R; Pahlevani F; Sahajwalla V, 2018, 'Solid State Phase Transformation Mechanism in High Carbon Steel Under Compressive Load and with Varying Cr Percent', in TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings, Springer, Cham, Phoenix, Arizona, USA, pp. 797 - 802, presented at TMS 2018 147th Annual Meeting & Exhibition, Phoenix, Arizona, USA, 11 March 2018 - 15 March 2018, http://dx.doi.org/10.1007/978-3-319-72526-0_75
    Conference Papers | 2018
    Tanaka Y; Pahlevani F; Sahajwalla V, 2018, 'Agglomeration Behavior of Non-Metallic Inclusions in Liquid High Carbon Steel', in TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings, TMS 2018 147th Annual Meeting & Exhibition, Phoenix, Arizona, USA, presented at TMS 2018 147th Annual Meeting & Exhibition, Phoenix, Arizona, USA, 11 March 2018 - 15 March 2018
    Conference Abstracts | 2018
    Zhang X; Pahlevani F; Sahajwalla V; Bilbao J, 2018, 'Experimental results on c-Si PV module delamination using a thermal process', in Proceedings of the Asia Pacific Solar Research Conference 2018, Australian PV Institute, Sydney, presented at Asia-Pacific Solar Research Conference, Sydney
    Conference Papers | 2017
    Banerjee A; Pahlevani F; Sahajwalla V; Prusty G, 2017, 'Compressive deformation behaviour of high carbon steel at quasi-static strain rates', in 9th Australasian Congress on Applied Mechanics, ACAM 2017, Sydney, Australia, presented at 9th Australasian Congress on Applied Mechanics (ACAM9), Sydney, Australia, 27 November 2017 - 29 November 2017
    Conference Abstracts | 2017
    Echeverria C; Pahlevani F; Sahajwalla V, 2017, 'The effect of particle size reduction method in the mechanical performance of marine-polypropylene hybrid bio-composite material', in The effect of particle size reduction method in the mechanical performance of marine-polypropylene hybrid bio-composite material, ICNF 2017 - 3rd International Conference on Natural Fibers – Advanced Materials for a Greener World, Braga, Portugal,, presented at ICNF 2017 - 3rd International Conference on Natural Fibers – Advanced Materials for a Greener World, Braga, Portugal,, 21 June 2017 - 23 June 2017, https://www.icnf2017.fibrenamics.com/assets/uploaded/Files2017/ICNF2017%20-%20Final%20Programme.pdf
    Conference Abstracts | 2017
    Mayyas M; Pahlevani F; Sahajwalla V, 2017, 'A Sustainable Approach for Waste Management: Automotive Waste Transformation into High Value Titanium Nitride Ceramic', in A Sustainable Approach for Waste Management: Automotive Waste Transformation into High Value Titanium Nitride Ceramic, ICST 2017: 19th International Conference on Sustainable Technologies, Amsterdam, The Netherlands, presented at ICST 2017: 19th International Conference on Sustainable Technologies, Amsterdam, The Netherlands, 10 July 2017 - 11 July 2017, https://www.waset.org/abstracts/61761
    Conference Papers | 2017
    Pahlevani F; Dippenaar, R. ; Gorjizadeh, N. ; Cholake, S. T. ; Hossain, R. ; Kumar, R. ; Sahajwalla VH, 2017, 'Surface Modification of Steel Using Automotive Waste as Raw Materials', in Surface Modification of Steel Using Automotive Waste as Raw Materials, International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, Kruger National Park, South Africa, presented at International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, Kruger National Park, South Africa, 23 January 2017 - 25 January 2017, http://dx.doi.org/10.1016/j.promfg.2016.12.007
    Conference Papers | 2017
    Pahlevani F; Echeverria Encina CA; Handoko W; Sahajwalla V, 2017, 'Mattresses and fabrics as new resources for innovative building material', in Mattresses and fabrics as new resources for innovative building material, Australian Industrial Ecology Conference 2017, Hunter Valley, NSW, presented at Australian Industrial Ecology Conference 2017, Hunter Valley, NSW, 06 September 2017 - 08 September 2017
    Conference Papers | 2016
    Echeverria, C. ; Gaikwad, V ; Pahlevani, F. ; Sahajwalla VH, 2016, 'Study of Macroalgae and Mollusc Wastes as Secondary Fillers in Novel Wood-Plastic Bio-composite Particleboard', in Biocomp 2016, The 13th Pacific Rim Bio-based Composites Symposium. Bio-based composites for sustainable futures, Concepcion, Chile, presented at The 13th Pacific Rim Bio-based Composites Symposium. Bio-based composites for sustainable futures, Concepcion, Chile, 13 November 2016 - 15 November 2016
    Other | 2016
    Pahlevani F; sahajwalla V, 2016, Steel from old tyres and ceramics from nutshells – how industry can use our rubbish, , https://theconversation.com/steel-from-old-tyres-and-ceramics-from-nutshells-how-industry-can-use-our-rubbish-66831
    Conference Papers | 2012
    Inoue R; Nakamoto M; Pahlevani F; Yamamoto T; Kitamura S; Ariyama T, 2012, 'Removal of rare elements from iron ore using iron- and steelmaking processes', in Removal of rare elements from iron ore using iron- and steelmaking processes, 5th International Congress on the Science and Technology of Steelmaking, Dresden, Germany, presented at 5th International Congress on the Science and Technology of Steelmaking, Dresden, Germany, 01 October 2012 - 03 October 2012
    Conference Papers | 2011
    Kitamura S; Pahlevani F; Maruoka N; Shibata H, 2011, 'Improvment of dephosphorization by using multiphase slag', in Improvment of dephosphorization by using multiphase slag, High Temperature Processing Symposium, Melbourne, Australia, presented at High Temperature Processing Symposium, Melbourne, Australia, 07 February 2011 - 08 February 2011
    Conference Papers | 2011
    Kitamura S; Pahlevani F; Shibata H; Miyata M; Tamura T; Higuchi Y, 2011, 'Improvement of kinetic model for hot metal dephosphrization', in Improvement of kinetic model for hot metal dephosphrization, International conference on modelling and simulation of metallurgical process in steelmaking, Dusseldorf, Germany, presented at International conference on modelling and simulation of metallurgical process in steelmaking, Dusseldorf, Germany, 27 June 2011 - 01 July 2011
    Conference Papers | 2009
    Pahlevani F; Kitamura S; Shibata H; Maruoka N, 2009, 'Kinetic model of Dephosphorization in Converter', in Kinetic model of Dephosphorization in Converter, international conference on Simulation and Modeling of Metallurgical Process in Steelmaking, Leoben, Austria, presented at international conference on Simulation and Modeling of Metallurgical Process in Steelmaking, Leoben, Austria, 08 September 2009 - 10 September 2009
    Conference Papers | 2009
    Pahlevani F; Kitamura S; Shibata H; Maruoka N, 2009, 'Simulation Model of Reaction kinetics for BOF operation', in Simulation Model of Reaction kinetics for BOF operation, 158th ISIJ autumn meeting, Kyoto, Japan, presented at 158th ISIJ autumn meeting, Kyoto, Japan, 15 September 2009 - 17 September 2009
    Conference Posters | 2009
    Pahlevani F; Kitamura S; Shibata H; Maruoka N, 2009, 'Simulation of Steel Refining Process (Dephosphorization)', Sendai, Japan, presented at Second French Research Organizations Tohoku University Joint Workshop on Frontier Materials (FRONTIER-2009), Sendai, Japan, 29 November 2009 - 03 December 2009
    Conference Papers | 2008
    Pahlevani F; Anzai K; Niyama E, 2008, 'Quick semi-solid slurry making method using metallic cup', in Quick semi-solid slurry making method using metallic cup, international conference of Semi-Solid Processing of alloys and Composite, Achen Germany and Liege Belgium, presented at international conference of Semi-Solid Processing of alloys and Composite, Achen Germany and Liege Belgium, 16 September 2008 - 18 September 2008
    Conference Papers | 2008
    Pahlevani F; Yaokawa J; Anzai K, 2008, 'Effect of Cup Design on slurry properties in Cup-Cast method', in Effect of Cup Design on slurry properties in Cup-Cast method, 156th ISIJ autumn meeting, Kumamoto, Japan, presented at 156th ISIJ autumn meeting, Kumamoto, Japan, 28 September 2008 - 30 September 2008
    Conference Papers | 2006
    Pahlevani F; Endo Y; Yaokawa J; Itamura M; Kikuchi M; Nagasawa O; Anzai K, 2006, 'Development of Cup-Cast Method', in Development of Cup-Cast Method, 9th international conference of Semi-Solid Processing of alloys and Composite, Busan, Korea, presented at 9th international conference of Semi-Solid Processing of alloys and Composite, Busan, Korea, 11 September 2006 - 13 September 2006
    Conference Papers | 2006
    Pahlevani F; Yaokawa J; Anzai K, 2006, 'Investigation of Heat Transfer in the Cup-Cast method by Experiment, and Analytical Method', in Investigation of Heat Transfer in the Cup-Cast method by Experiment, and Analytical Method, 9th international conference on Advanced Computational Method and Experimental Measurement in Heat Transfer, The New Forest, England, presented at 9th international conference on Advanced Computational Method and Experimental Measurement in Heat Transfer, The New Forest, England, 05 July 2006 - 07 July 2006
    Conference Papers | 2006
    Pahlevani F; Yaokawa J; Anzai K, 2006, 'Semi-Solid Slurry Preparation Without additional stirring, Cup-Cast Method', in Semi-Solid Slurry Preparation Without additional stirring, Cup-Cast Method, 10th international conference on Aluminium Alloys, Vancouver, Canada, presented at 10th international conference on Aluminium Alloys, Vancouver, Canada, 09 July 2006 - 13 July 2006
    Conference Papers | 2004
    Pahlevani F; Nili Ahmadabadi M, 2004, 'Semi-solid casting of ductile cast iron by mechanical stirring method', in Semi-solid casting of ductile cast iron by mechanical stirring method, 8th international conference of Semi-Solid Casting and Processing of Metals and Composite, Limassol Cyprus, pp. 103 - 108, presented at 8th international conference of Semi-Solid Casting and Processing of Metals and Composite, Limassol Cyprus, 05 September 2004 - 08 September 2004
    Conference Papers | 2004
    Pahlevani F; Salarfar S; Nili-Ahmadabadi M, 2004, 'Dendritic-giobular structure transition of ductile iron in semi-solid casting using cooling slope plate', in Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004, pp. 441 - 450
    Conference Papers | 2004
    Pahlevani F, 2004, 'Mechanism of Dendritic to globular structure transformation in production of semi-solid metals by mechanical stirring method', in Mechanism of Dendritic to globular structure transformation in production of semi-solid metals by mechanical stirring method, 8th international conference of Semi-Solid Casting and Processing of Metals and Composite, Limassol Cyprus, pp. 256 - 260, presented at 8th international conference of Semi-Solid Casting and Processing of Metals and Composite, Limassol Cyprus, 05 September 2004 - 08 September 2004
    Preprints |
    Shang Z; Cai X; Jiao X; Zheng Y; Zhang B; Pahlevani F; Feng P, 3d Microstructure and Anti-Oxidation Behavior of Porous Coal Intermetallic Fabricated by Rapid Thermal Explosion, , http://dx.doi.org/10.2139/ssrn.4194718

2020                                         Named as one of the Australia's most innovative engineers

2013                                         Licencing award for licensing the liquid forging, an in-house development, to AAVID THERMOALLOY Company, SIMTech, Singapore.

2012                                         Nominated for Sawamura award and Guimaraes award for the best paper by ISIJ international journal Japan

2011                                         Best industrial oriented research of the year in SIMTech, Singapore

2010                                         Best research of the year in Iron and Steel Institute of Japan (ISIJ)

2009                                         Hata-no award for young researcher, Tohoku University

2007                                         Best National project for developing new method in Al casting part in Japan