Michael Ferry

Head of School

Professional Experience

  • Head of School, School of Materials Science & Engineering, UNSW Sydney (2019- )
  • Professor, School of Materials Science & Engineering, UNSW Sydney (2008- )
  • Deputy Director, ARC Centre of Excellence for Design in Light Metals (2005-14)
  • Associate Professor, School of Materials Science & Engineering, UNSW Sydney (2004-07)
  • Senior Lecturer, School of Materials Science & Engineering, UNSW Sydney (2000-03)
  • Lecturer, Department of Materials Engineering, University of Wollongong (1996-99)
  • EPSRC Postdoctoral Fellow, School of Materials, University of Manchester (1994-96)
  • Metallurgical Engineer, Alcan Australia Limited (1989-94)

 

Visiting Academic Positions

  • Baosteel Talent Development Institute Teaching Professor, Baosteel, China (2013-16)
  • Visiting Professor, School of Materials Science & Engineering, National University of Singapore (2012-13)
  • Visiting Professor, Ecole des Mines de Saint Etienne (2008-11)
  • Visiting Senior Fellow, School of Materials, University of Manchester (2004)
  • Visiting Fellow, Department of Metallurgy & Materials Science, University of Cambridge (2002)

 

Professional Memberships

  • Chartered Materials Professional, Australia (CMP, 2020)
  • Fellow of Institution of Engineers Australia (FIEAust, 2007)
  • Fellow of Institute of Materials, Minerals and Mining (UK) (FIMMM, 2006)
  • Chartered Engineer (UK) (CEng, 1996)
  • Chartered Professional Engineer (Australia) (CPEng, 1996)
  • Member of Institute of Materials Engineering, Australia (IMEA, 1996)
  • Member of Minerals, Metals and Materials Society, USA (TMS, 1996)
Book Chapters
add
Miskovic DM; Laws KJ; Ferry M, 2021, 'Metallic glasses', in Structural Biomaterials, Elsevier, pp. 275 - 300, http://dx.doi.org/10.1016/b978-0-12-818831-6.00005-7
2021
Ferry M, 2016, 'Alloys: Iron', in Reference Module in Materials Science and Materials Engineering, Elsevier, http://dx.doi.org/10.1016/b978-0-12-803581-8.01117-6
2016
Laws KJ; Shamlaye KF; Löffler JF; Ferry M, 2016, 'Developments in High Magnesium-Content Bulk Metallic Glasses and Future Possibilities', in Magnesium Technology 2016, Springer International Publishing, pp. 13 - 14, http://dx.doi.org/10.1007/978-3-319-48114-2_5
2016
Manohar PA; Ferry M; Chandra T, 2016, 'Recrystallization of Ferrite and Austenite', in Reference Module in Materials Science and Materials Engineering, Elsevier, http://dx.doi.org/10.1016/b978-0-12-803581-8.03028-9
2016
Loeb A; Soe B; McMahon C; Ferry M; Bassman L, 2014, 'Identification and Characterization of Subgrain Features in 3D EBSD Data', in Proceedings of the 2nd International Congress on 3D Materials Science, Springer International Publishing, pp. 9 - 14, http://dx.doi.org/10.1007/978-3-319-48123-4_2
2014
Shamlaye KF; Laws KJ; Ferry M, 2013, 'Bulk Metallic Glass Composites Fabricated within the Supercooled Liquid Region', in Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing, Springer International Publishing, pp. 3221 - 3228, http://dx.doi.org/10.1007/978-3-319-48764-9_397
2013
Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of bulk metallic glass composite with high magnesium content', in TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting, pp. 247 - 252, http://dx.doi.org/10.1002/9781118663547.ch31
2013
Soe B; McMahon C; Golay D; Quadir MZ; Ferry M; Bassman L, 2013, 'Subgrain Boundary Identification in 3D EBSD Data through Fast Multiscale Clustering', in 1stInternational Conference on 3D Materials Science, John Wiley & Sons, Inc., pp. 189 - 194, http://dx.doi.org/10.1002/9781118686768.ch29
2013
Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of Bulk Metallic Glass Composite with High Magnesium Content', in TMS2013 Supplemental Proceedings, pp. 245 - 252, http://dx.doi.org/10.1002/9781118663547.ch31
2013
McMahon C; George C; Quadir Z; Ferry M; Bassman L, 2011, 'Segmentation of Three‐Dimensional EBSD Data through Fast Multiscale Clustering', in EPD Congress 2011, pp. 184 - 192, http://dx.doi.org/10.1002/9781118495285.ch23
2011
Ferry M, 2006, 'As-Cast Microstructure, Texture and Properties', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 151 - 194, http://dx.doi.org/10.1533/9781845691660.151
2006
Ferry M, 2006, 'DSC Process Variables and Cast Strip Quality', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 101 - 150, http://dx.doi.org/10.1533/9781845691660.101
2006
Ferry M, 2006, 'Metallurgy of Alloys Suitable for Direct Strip Casting', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 1 - 24, http://dx.doi.org/10.1533/9781845691660.1
2006
Ferry M, 2006, 'Secondary Processing and Fabrication', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 195 - 236, http://dx.doi.org/10.1533/9781845691660.195
2006
Ferry M, 2006, 'Continuous Casting Processes and the Emergence of DSC', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 63 - 100, http://dx.doi.org/10.1533/9781845691660.63
2006
Ferry M, 2005, 'Alloys: Iron', in Bassani F (ed.), Encyclopedia of Condensed Matter Physics, edn. First, Elsevier, USA, pp. 46 - 53
2005
Manohar P; Ferry M, 2005, '3 Thermomechanical processing of ferrous alloys', in The Deformation and Processing of Structural Materials, pp. 76 - 125, http://dx.doi.org/10.1533/9781845690786.76
2005
Ferry M, 2005, '6 Discontinuously reinforced metal matrix composites', in The Deformation and Processing of Structural Materials, pp. 203 - 251, http://dx.doi.org/10.1533/9781845690786.203
2005
Manohar P; Ferry M, 2005, 'Thermomechanical processing of ferrous alloys', in The Deformation and Processing of Structural Materials: A Volume in Woodhead Publishing Series in Civil and Structural Engineering, pp. 76 - 125, http://dx.doi.org/10.1533/9781845690786.76
2005
Ferry M; Manohar PA, 2005, 'Thermomechanical processing of ferrous alloys', in Guo X (ed.), Deformation and Processing of Structural Materials, edn. First, Woodhead Ltd + CRC Press, UK and USA, pp. 75 - 125
2005
Ferry M, 2005, 'Discontinuosly reinforced metal matrix composites', in Guo X (ed.), Deformation and Processing of Structural Materials, edn. First, Woodhead Ltd + CRC Press, UK and USA, pp. 203 - 251
2005
Manohar PA; Ferry M; Chandra T, 2001, 'Ferrite and Austenite, Recrystallization of', in Encyclopedia of Materials: Science and Technology, Elsevier, pp. 3019 - 3024, http://dx.doi.org/10.1016/b0-08-043152-6/00539-8
2001
Journal articles
add
Tang S; Xin T; Xu W; Miskovic D; Li C; Birbilis N; Ferry M, 2021, 'The composition-dependent oxidation film formation in Mg-Li-Al alloys', Corrosion Science, vol. 187, http://dx.doi.org/10.1016/j.corsci.2021.109508
2021
Xin T; Zhao Y; Mahjoub R; Jiang J; Yadav A; Nomoto K; Niu R; Tang S; Ji F; Quadir Z; Miskovic D; Daniels J; Xu W; Liao X; Chen LQ; Hagihara K; Li X; Ringer S; Ferry M, 2021, 'Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition', Science Advances, vol. 7, http://dx.doi.org/10.1126/sciadv.abf3039
2021
Yi JJ; Kong LT; Ferry M; Tang CG; Sha G; Li JF, 2021, 'Origin of the separated α-Al nanocrystallization with Si added to Al86Ni9La5 amorphous alloy', Materials Characterization, vol. 178, http://dx.doi.org/10.1016/j.matchar.2021.111199
2021
Sun Q; Miskovic DM; Kong H; Ferry M, 2021, 'Transition from relaxation to rejuvenation in ultrastable metallic glass driven by annealing', Applied Surface Science, vol. 546, http://dx.doi.org/10.1016/j.apsusc.2021.149048
2021
He P; Kong H; Liu Q; Ferry M; Kruzic JJ; Li X, 2021, 'Elevated temperature mechanical properties of TiCN reinforced AlSi10Mg fabricated by laser powder bed fusion additive manufacturing', Materials Science and Engineering A, vol. 811, pp. 141025 - 141025, http://dx.doi.org/10.1016/j.msea.2021.141025
2021
Sun Q; Miskovic DM; Ferry M, 2021, 'Film thickness effect on formation of ultrastable metallic glasses', Materials Today Physics, vol. 18, http://dx.doi.org/10.1016/j.mtphys.2021.100370
2021
Liu LJ; Wei XX; Ferry M; Li JF, 2020, 'Investigation of the origin of anomalous eutectic formation by remelting thin-gauge samples of an Ag-Cu eutectic alloy', Scripta Materialia, vol. 174, pp. 72 - 76, http://dx.doi.org/10.1016/j.scriptamat.2019.08.034
2020
Chen Y; Tang C; Laws K; Zhu Q; Ferry M, 2020, 'Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing', Journal of Alloys and Compounds, vol. 820, http://dx.doi.org/10.1016/j.jallcom.2019.153079
2020
Sun Q; Miskovic DM; Laws K; Kong H; Geng X; Ferry M, 2020, 'Transition towards ultrastable metallic glasses in Zr-based thin films', Applied Surface Science, vol. 533, http://dx.doi.org/10.1016/j.apsusc.2020.147453
2020
Mahjoub R; Basha DA; Singh A; Ferry M; Stanford N, 2020, 'The contrasting fracture behaviour of twin boundaries and general boundaries – A first principles study based on experimental observation', Materials Science and Engineering A, vol. 781, http://dx.doi.org/10.1016/j.msea.2020.139225
2020
Yan YM; Gharbi O; Maltseva A; Chen XB; Zeng ZR; Xu SW; Xu WQ; Volovich P; Ferry M; Birbilis N, 2019, 'Investigating the structure of the surface film on a corrosion resistant Mg-Li(-Al-Y-Zr) alloy', Corrosion, vol. 75, pp. 80 - 89, http://dx.doi.org/10.5006/2995
2019
Tang S; Xin T; Xu W; Miskovic D; Sha G; Quadir Z; Ringer S; Nomoto K; Birbilis N; Ferry M, 2019, 'Precipitation strengthening in an ultralight magnesium alloy', Nature Communications, vol. 10, http://dx.doi.org/10.1038/s41467-019-08954-z
2019
Mahjoub R; Ferry M; Stanford N, 2019, 'Local topology and its effects on grain boundary and solute segregation in HCP magnesium', Materialia, vol. 6, http://dx.doi.org/10.1016/j.mtla.2019.100258
2019
Tang C; Yi J; Xu W; Ferry M, 2018, 'Temperature rise in shear bands in a simulated metallic glass', Physical Review B, vol. 98, http://dx.doi.org/10.1103/PhysRevB.98.224203
2018
Hamilton N; Ferry M, 2018, 'ggtern: Ternary Diagrams Using ggplot2', Journal of Statistical Software, vol. 87, pp. 1 - 17, http://dx.doi.org/10.18637/jss.v087.c03
2018
Tang C; Laws K; Ferry M, 2018, 'Atomistic origin of stress overshoots and serrations in a CuZr metallic glass', Materialia, vol. 1, pp. 121 - 127, http://dx.doi.org/10.1016/j.mtla.2018.04.005
2018
Lu BF; Kong LT; Laws KJ; Xu WQ; Jiang Z; Huang YY; Ferry M; Li JF; Zhou YH, 2018, 'EXAFS and molecular dynamics simulation studies of Cu-Zr metallic glass: Short-to-medium range order and glass forming ability', Materials Characterization, vol. 141, pp. 41 - 48, http://dx.doi.org/10.1016/j.matchar.2018.04.036
2018
Mahjoub R; Laws KJ; Stanford N; Ferry M, 2018, 'General trends between solute segregation tendency and grain boundary character in aluminum - An ab inito study', Acta Materialia, vol. 158, pp. 257 - 268, http://dx.doi.org/10.1016/j.actamat.2018.07.069
2018
Xiong X; Yi J; Kong L; Ferry M; Li J; Zhou Y, 2018, 'On the optimal glass-forming composition of AlCoY amorphous alloys', Materials Transactions, vol. 59, pp. 1545 - 1550, http://dx.doi.org/10.2320/matertrans.M2018177
2018
Duan JQ; Quadir MZ; Ferry M, 2017, 'Engineering low intensity planar textures in commercial purity nickel sheets by cross roll bonding', Materials Letters, vol. 188, pp. 138 - 141, http://dx.doi.org/10.1016/j.matlet.2016.11.040
2017
Kaufman JL; Pomrehn GS; Pribram-Jones A; Mahjoub R; Ferry M; Laws KJ; Bassman L, 2017, 'Stacking fault energies of nondilute binary alloys using special quasirandom structures', Physical Review B, vol. 95, http://dx.doi.org/10.1103/PhysRevB.95.094112
2017
Wang X; Ma HJ; Sheng ZH; Jin SF; Xu W; Ferry M; Chen L; Duan JQ; Wang WM, 2017, 'On the magnetic anisotropy in Fe78Si9B13 ingots and amorphous ribbons: Orientation aligning of Fe-based phases/clusters', AIP Advances, vol. 7, http://dx.doi.org/10.1063/1.4974305
2017
Miskovic DM; Pohl K; Birbilis N; Laws KJ; Ferry M, 2017, 'Formation of a phosphate conversion coating on bioresorbable Mg-based metallic glasses and its effect on corrosion performance', Corrosion Science, vol. 129, pp. 214 - 225, http://dx.doi.org/10.1016/j.corsci.2017.10.014
2017
Hamilton NE; Mahjoub R; Laws KJ; Ferry M, 2017, 'A blended NPT/NVT scheme for simulating metallic glasses', Computational Materials Science, vol. 130, pp. 130 - 137, http://dx.doi.org/10.1016/j.commatsci.2017.01.006
2017
Duan JQ; Quadir MZ; Xu W; Kong C; Ferry M, 2017, 'Texture balancing in a fcc/bcc multilayered composite produced by accumulative roll bonding', Acta Materialia, vol. 123, pp. 11 - 23, http://dx.doi.org/10.1016/j.actamat.2016.10.023
2017
Mahjoub R; laws ; laws KJL; ferry M, 2017, 'Amorphous phase stability and the interplay between electronic structure and topology', Acta Materialia, vol. 131, pp. 131 - 140, http://dx.doi.org/10.1016/j.actamat.2017.03.070
2017
Mahjoub R; XU W; LAWS KJL; Ferry M, 2017, 'Ab initio study of the likely orientation relationships of interphase and homophase interfaces in a two-phase HCP + BCC Mg-Li alloy', Computational Materials Science, vol. 139C, pp. 406 - 4011, http://dx.doi.org/10.1016/j.commatsci.2017.08.026
2017
Chen H; Xu W; Ye Z; Yao Y; Qu J; Yun F; Warner JA; Cheng Z; Liu J; Ringer SP; Ferry M; Zheng R, 2017, 'Microstructural and texture evolution of strip cast Nd-Fe-B flake', Crystal Growth and Design, vol. 17, pp. 6550 - 6558, http://dx.doi.org/10.1021/acs.cgd.7b01213
2017
Kang JL; Xu W; Wei XX; Ferry M; Li JF, 2017, 'Solidification behavior of Co-Sn eutectic alloy with Nb addition', Journal of Alloys and Compounds, vol. 695, pp. 1498 - 1504, http://dx.doi.org/10.1016/j.jallcom.2016.10.289
2017
Wei XX; Xu W; Kang JL; Ferry M; Li JF, 2017, 'Phase Selection in Solidification of Undercooled Co–B Alloys', Journal of Materials Science and Technology, vol. 33, pp. 352 - 358, http://dx.doi.org/10.1016/j.jmst.2016.09.012
2017
Miskovic DM; Pohl K; Birbilis N; Laws KJ; Ferry M, 2016, 'Examining the elemental contribution towards the biodegradation of Mg-Zn-Ca ternary metallic glasses', Journal of Materials Chemistry B, vol. 4, pp. 2679 - 2690, http://dx.doi.org/10.1039/c6tb00342g
2016
Mahjoub R; Laws KJ; Hamilton NE; Granata D; Ferry M, 2016, 'An atomic-scale insight into the effects of hydrogen microalloying on the glass-forming ability and ductility of Zr-based bulk metallic glasses', Computational Materials Science, vol. 125, pp. 197 - 205, http://dx.doi.org/10.1016/j.commatsci.2016.08.049
2016
Mahjoub R; Hamilton NE; Laws KJ; Ferry M, 2016, 'Softening of phonon spectra in metallic glasses', njp computational materials, vol. 2, http://dx.doi.org/10.1038/npjcompumats.2016.29
2016
Duan JQ; Quadir MZ; Ferry M, 2016, 'An Analytical Framework for Predicting the Limit in Structural Refinement in Accumulative Roll Bonded Nickel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, pp. 471 - 478, http://dx.doi.org/10.1007/s11661-015-3240-6
2016
Yi J; Xu W; Xiong X; Kong L; Ferry M; Li J, 2016, 'Glass-Forming Ability and Crystallization Behavior of Al86Ni9La5 Metallic Glass with Si Addition', Advanced Engineering Materials, vol. 18, pp. 972 - 977, http://dx.doi.org/10.1002/adem.201500354
2016
Wei XX; Xu W; Kang JL; Ferry M; Li JF, 2016, 'Metastable Co23B6 phase solidified from deeply undercooled Co79.3B20.7 alloy melt', Journal of Materials Science, vol. 51, pp. 6436 - 6443, http://dx.doi.org/10.1007/s10853-016-9941-4
2016
Kang J; Xu W; Wei X; Ferry M; Li J, 2016, 'Effect of Nb on the Growth Behavior of Co3Sn2 Phase in Undercooled Co-Sn Melts', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, pp. 6187 - 6196, http://dx.doi.org/10.1007/s11661-016-3722-1
2016
Eder K; Felfer PJ; Ferry M; Xia K; Cairney JM, 2016, 'Grain size stability in Al-Sc alloys processed by severe plastic deformation', Scripta Materialia, vol. 123, pp. 105 - 108, http://dx.doi.org/10.1016/j.scriptamat.2016.06.005
2016
Tang C; Peng H; Chen Y; Ferry M, 2016, 'Formation and dilatation of shear bands in a Cu-Zr metallic glass: A free volume perspective', Journal of Applied Physics, vol. 120, http://dx.doi.org/10.1063/1.4972189
2016
Shamlaye KF; Laws KJ; Ferry M, 2016, 'Supercooled liquid fusion of carbon fibre-bulk metallic glass composites with superplastic forming properties', Scripta Materialia, vol. 111, pp. 127 - 130, http://dx.doi.org/10.1016/j.scriptamat.2015.08.001
2016
Loeb A; Ferry M; Bassman L, 2016, 'Segmentation of 3D EBSD data for subgrain boundary identification and feature characterization', Ultramicroscopy, vol. 161, pp. 83 - 89, http://dx.doi.org/10.1016/j.ultramic.2015.11.003
2016
Hou L; Raveggi M; Chen XB; Xu W; Laws KJ; Wei Y; Ferry M; Birbilis N, 2016, 'Investigating the passivity and dissolution of a corrosion resistant Mg-33at.%Li alloy in aqueous chloride using online ICP-MS', Journal of the Electrochemical Society, vol. 163, pp. C324 - C329, http://dx.doi.org/10.1149/2.0871606jes
2016
Quadir MZ; Lau KD; Afrin N; Ferry M, 2015, 'Diffusion and precipitation phenomena across layer interfaces in a roll bonding composite of Al(Si) and Al(Cu)', Composite Interfaces, vol. 22, pp. 13 - 24, http://dx.doi.org/10.1080/15685543.2015.982450
2015
Xu W; Birbilis N; Sha G; Wang Y; Daniels JE; Xiao Y; Ferry M, 2015, 'A high-specific-strength and corrosion-resistant magnesium alloy', Nature Materials, vol. 14, pp. 1229 - 1235, http://dx.doi.org/10.1038/nmat4435
2015
Afrin N; Quadir MZ; Ferry M, 2015, 'Formation of Highly Misoriented Fragments at Hot Band Grain Boundaries During Cold Rolling of Interstitial-Free Steel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 46, pp. 2956 - 2964, http://dx.doi.org/10.1007/s11661-015-2878-4
2015
Yi JJ; Xu W; Xiong XZ; Kong LT; Ferry M; Li JF, 2015, 'Influence of mutual substitution between la and Gd on the glass-forming ability of Al-Ni-La-Gd alloys', Journal of Alloys and Compounds, vol. 628, pp. 245 - 250, http://dx.doi.org/10.1016/j.jallcom.2014.12.180
2015
Yi J; Xu W; Xiong X; Kong L; Ferry M; Li J, 2015, 'Abnormal crystallization behavior of an (Al86Ni9La5)98Si2 amorphous alloy', Materials Letters, vol. 159, pp. 403 - 405, http://dx.doi.org/10.1016/j.matlet.2015.07.048
2015
Mahjoub R; Laws KJ; Scicluna JP; Daniels JE; Ferry M, 2015, 'A first principles molecular dynamics study of the relationship between atomic structure and elastic properties of Mg-Zn-Ca amorphous alloys', Computational Materials Science, vol. 96, pp. 246 - 255, http://dx.doi.org/10.1016/j.commatsci.2014.09.019
2015
Mahjoub R; Xu W; Gun B; Laws KJ; Kong LT; Li JF; Ferry M, 2015, 'Heterogeneous nucleation at inoculant particles in a glass forming alloy: an ab initio molecular dynamics investigation of interfacial properties and local chemical bonding', Computational Materials Science, vol. 108, pp. 94 - 102, http://dx.doi.org/10.1016/j.commatsci.2015.06.008
2015
Laws KJ; Miracle DB; Ferry M, 2015, 'A predictive structural model for bulk metallic glasses', Nature Communications, vol. 6, http://dx.doi.org/10.1038/ncomms9123
2015
Liu SY; Cao QP; Qian X; Wang C; Wang XD; Zhang DX; Hu XL; Xu W; Ferry M; Jiang JZ, 2015, 'Effects of substrate temperature on structure, thermal stability and mechanical property of a Zr-based metallic glass thin film', Thin Solid Films, vol. 595, pp. 17 - 24, http://dx.doi.org/10.1016/j.tsf.2015.10.049
2015
Lashgari HR; Chen Z; Liao XZ; Chu D; Ferry M; Li S, 2015, 'Thermal stability, dynamic mechanical analysis and nanoindentation behavior of FeSiB(Cu) amorphous alloys', Materials Science and Engineering: A, vol. 626, pp. 480 - 499, http://dx.doi.org/10.1016/j.msea.2014.12.097
2015
Wei XX; Lin X; Xu W; Huang QS; Ferry M; Li JF; Zhou YH, 2015, 'Remelting-induced anomalous eutectic formation during solidification of deeply undercooled eutectic alloy melts', Acta Materialia, vol. 95, pp. 44 - 56, http://dx.doi.org/10.1016/j.actamat.2015.05.014
2015
Lashgari HR; Chu D; Xie S; Sun H; Ferry M; Li S, 2014, 'ChemInform Abstract: Composition Dependence of the Microstructure and Soft Magnetic Properties of Fe-Based Amorphous/Nanocrystalline Alloys. A Review Study', ChemInform, vol. 45, pp. no - no, http://dx.doi.org/10.1002/chin.201426228
2014
Afrin N; Quadir MZ; Ferry M, 2014, 'On the complexities of microband interactions in a cold-deformed goss-oriented Ni single crystal', Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 45, pp. 345 - 351, http://dx.doi.org/10.1007/s11663-013-9827-7
2014
Chu D; Lashgari H; Jiang Y; Ferry M; Laws K; Xie S; Sun H; Li S, 2014, 'Recent progress in high Bs and low Hc Fe-based nanocrystalline alloys', Nanotechnology Reviews, vol. 3, pp. 153 - 159, http://dx.doi.org/10.1515/ntrev-2013-0030
2014
Laws KJ; Cao JD; Reddy C; Shamlaye KF; Gun B; Ferry M, 2014, 'Ultra magnesium-rich, low-density Mg-Ni-Ca bulk metallic glasses', Scripta Materialia, vol. 88, pp. 37 - 40, http://dx.doi.org/10.1016/j.scriptamat.2014.06.002
2014
Biletska O; Laws KJ; Gibson MA; Ferry M, 2014, 'Fabrication of an in situ bulk metallic glass composite with high magnesium content', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 45, pp. 2352 - 2356, http://dx.doi.org/10.1007/s11661-013-2084-1
2014
Lashgari HR; Chu D; Xie S; Sun H; Ferry M; Li S, 2014, 'Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: A review study', Journal of Non-Crystalline Solids, vol. 391, pp. 61 - 82, http://dx.doi.org/10.1016/j.jnoncrysol.2014.03.010
2014
Zinnia NA; Quadir MZ; Munroe PR; Ferry M, 2014, 'Unusual crystallographic aspects of Microband boundaries within {111}<110> oriented grains in a cold rolled interstitial free steel', ISIJ International, vol. 54, pp. 1346 - 1352, http://dx.doi.org/10.2355/isijinternational.54.1346
2014
Cao JD; Laws KJ; Liu C; Ferry M, 2013, 'Thermoplastic formability of CaMgZn bulk metallic glasses for biomedical applications', International Journal of Materials and Product Technology, vol. 47, pp. 233 - 240, http://dx.doi.org/10.1504/IJMPT.2013.058962
2013
Ferry M; Laws KJ; White C; Miskovic DM; Shamlaye KF; Xu W; Biletska O, 2013, 'Recent developments in ductile bulk metallic glass composites', MRS Communications, vol. 3, pp. 1 - 12, http://dx.doi.org/10.1557/mrc.2012.32
2013
Zhou X; Ralston KD; Laws KJ; Cao JD; Gupta RK; Ferry M; Birbilis N, 2013, 'Effect of the degree of crystallinity on the electrochemical behavior of Mg65Cu25Y10 and Mg70Zn 25Ca5 bulk metallic glasses', Corrosion, vol. 69, pp. 781 - 792, http://dx.doi.org/10.5006/0870
2013
Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of an InSitu Bulk Metallic Glass Composite with High Magnesium Content', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, pp. 1 - 5
2013
Cao J; Laws KJ; Birbilis N; Ferry M, 2012, 'Potentiodynamic polarisation study of bulk metallic glasses based on the Mg-Zn-Ca ternary system', Corrosion Engineering Science and Technology, vol. 47, pp. 329 - 334, http://dx.doi.org/10.1179/1743278212Y.0000000016
2012
Cao J; Martens P; Laws KJ; Boughton PC; Ferry M, 2012, 'Quantitative in vitro assessment of Mg65 Zn30 Ca5 degradation and its effect on cell viability', Journal of Biomedical Materials Research Part B - Applied Biomaterials, vol. 101B, pp. 43 - 49, http://dx.doi.org/10.1002/jbm.b.32811
2012
Laws KJ; Shamlaye KF; Ferry M, 2012, 'ChemInform Abstract: Synthesis of Ag-Based Bulk Metallic Glass in the Ag-Mg-Ca-[Cu] Alloy System.', ChemInform, vol. 43, pp. no - no, http://dx.doi.org/10.1002/chin.201209004
2012
Bomma Reddy AR; Quadir MZ; Ferry M, 2012, 'Time and temperature regime of continuous grain coarsening in an ECAP-processed Al(0.1 wt.% Sc) alloy', Journal of Alloys and Compounds, vol. 527, pp. 145 - 151, http://dx.doi.org/10.1016/j.jallcom.2012.02.181
2012
Laws KJ; Shamlaye KF; Gun B; Ferry M, 2012, 'Synthesis of Ag-based bulk metallic glass in the Ag-Mg-Ca-[Cu] alloy system', Journal of Alloys and Compounds, vol. 513, pp. 10 - 13, http://dx.doi.org/10.1016/j.jallcom.2011.10.097
2012
Cao J; Kirkland N; Laws KJ; Birbilis N; Ferry M, 2012, 'Ca-Mg-Zn bulk metallic glasses as bioresorbable metals', ACTA Biomaterialia, vol. 8, pp. 2375 - 2383, http://dx.doi.org/10.1016/j.actbio.2012.03.009
2012
Laws KJ; Saxey DW; McKenzie WR; Marceau RKW; Gun B; Ringer SP; Ferry M, 2012, 'Analysis of dynamic segregation and crystallisation in Mg65Cu25Y10 bulk metallic glass using atom probe tomography', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 556, pp. 558 - 566, http://dx.doi.org/10.1016/j.msea.2012.07.026
2012
Laws KJ; Shamlaye KF; Cao J; Scicluna JP; Ferry M, 2012, 'Locating new Mg-based bulk metallic glasses free of rare earth elements', Journal of Alloys and Compounds, vol. 542, pp. 105 - 110, http://dx.doi.org/10.1016/j.jallcom.2012.07.028
2012
Afrin N; Quadir MZ; Xu W; Ferry M, 2012, 'Spatial orientations and structural irregularities associated with the formation of microbands in a cold deformed Goss oriented Ni single crystal', ACTA Materialia, vol. 60, pp. 6288 - 6300, http://dx.doi.org/10.1016/j.actamat.2012.08.003
2012
Afrin N; Quadir MZ; Bassman L; Driver J; Albou A; Ferry M, 2011, 'The three-dimensional nature of microbands in a channel die compressed Goss-oriented Ni single crystal', Scripta Materialia, vol. 64, pp. 221 - 224, http://dx.doi.org/10.1016/j.scriptamat.2010.10.020
2011
Quadir MZ; Ferry M; Munroe PR, 2011, 'The initial stages of formation of low angle boundaries within lamellar bands during accumulative roll bonding of aluminum', Scripta Materialia, vol. 64, pp. 1106 - 1109, http://dx.doi.org/10.1016/j.scriptamat.2011.02.032
2011
Xu W; Zheng R; Laws KJ; Ringer SP; Ferry M, 2011, 'In situ formation of crystalline flakes in Mg-based metallic glass composites by controlled inoculation', Acta Materialia, vol. 59, pp. 7776 - 7786, http://dx.doi.org/10.1016/j.actamat.2011.08.044
2011
Laws KJ; Xu W; Privat K; Ferry M; Robin L, 2010, 'The three dimensional structure of Mg-rich plates in as-cast Mg-based bulk metallic glass composites', Metallurgical and Materials Transactions A Journal, vol. 41A, pp. 1691 - 1698, http://dx.doi.org/10.1007/s11661-009-9989-8
2010
Mohseni H; Keirs S; Chan SLI; Ferry M, 2010, 'Thermal stability of fine-grained 7075Al composite containing nanosized SiC particles', Materials Science and Technology, vol. 26, pp. 597 - 603
2010
Xu W; Ferry M, 2010, 'Recrystallization processes in cold rolled low carbon steel strip exhibiting different starting microstructures', Materials Science and Technology, vol. 26, pp. 333 - 342, http://dx.doi.org/10.1179/174328409X410791
2010
Laws KJ; Shamlaye KF; Gun B; Ferry M, 2010, 'ChemInform Abstract: Synthesis of Copper-Based Bulk Metallic Glasses in the Ternary Cu—Mg—Ca System.', ChemInform, vol. 41, http://dx.doi.org/10.1002/chin.201005214
2010
Gun B; Laws KJ; Ferry M, 2010, 'Viscosity-related properties of Mg65Cu25Y10 bulk metallic glass determined by uniaxial tension in the supercooled liquid region', Journal of Alloys and Compounds, vol. 496, pp. 582 - 588, http://dx.doi.org/10.1016/j.jallcom.2010.02.116
2010
Mohseni H; Keirs S; Chan SLI; Ferry M, 2010, 'High Temperature Stability of Fine Grained 7075 Al Alloy containing Nanosized SiC Particles', Materials Science and Technology, vol. 26, pp. 597 - 603, http://dx.doi.org/10.1179/174328409X443182
2010
Laws KJ; Shamlaye K; Wong K; Gun B; Ferry M, 2010, 'Prediction of glass forming compositions in metallic systems: copper-based bulk metallic glasses in the Cu-Mg-Ca system', Metallurgical and Materials Transactions A Journal, vol. 41A, pp. 1699 - 1705, http://dx.doi.org/10.1007/s11661-010-0274-7
2010
Xu W; Robin L; Zheng R; Laws KJ; Ferry M, 2010, 'Erratum: Phase redistribution in an in situ Mg-based bulk metallic glass composite during deformation in the supercooled liquid region (Scripta Materialia (2010) 63 (556-559))', Scripta Materialia, vol. 63, pp. 903, http://dx.doi.org/10.1016/j.scriptamat.2010.06.043
2010
Xu W; Ferry M, 2010, 'Recrystallization textures in cold rolled low carbon steel containing ferritic and bainitic microstructures', Materials Science and Technology, vol. 26, pp. 1159 - 1172, http://dx.doi.org/10.1179/174328409X441274
2010
Xu W; Zheng R; Laws KJ; Ferry M; Robin L, 2010, 'Phase redistribution in an in-situ Mg-based bulk metallic glass composite during deformation in the supercooled liquid region', Scripta Materialia, vol. 63, pp. 556 - 559, http://dx.doi.org/10.1016/j.scriptamat.2010.05.029
2010
Xu W; Quadir MZ; Ferry M, 2009, 'A high-resolution three-dimensional electron backscatter diffraction study of the nucleation of recrystallization in cold-rolled extra-low-carbon steel', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 40, pp. 1547 - 1556, http://dx.doi.org/10.1007/s11661-009-9873-6
2009
Xu W; Ferry M; Humphreys FJ, 2009, 'Spatial morphology of interfacial voids and other features generated at coarse silica particles in nickel during cold rolling and annealing', Scripta Materialia, vol. 60, pp. 862 - 865, http://dx.doi.org/10.1016/j.scriptamat.2009.01.034
2009
Quadir MZ; Al-Buhamad OH; Lau K; Quarfoth R; Bassman L; Munroe PR; Ferry M, 2009, 'The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets', International Journal of Materials Research, vol. 12, pp. 1705 - 1714, http://dx.doi.org/10.3139/146.110119
2009
Quadir MZ; Ferry M; Al-Buhamad OH; Munroe PR, 2009, 'Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding', ACTA Materialia, vol. 57, pp. 29 - 40, http://dx.doi.org/10.1016/j.actamat.2008.08.056
2009
Laws KJ; Gun B; Ferry M, 2009, 'Influence of casting parameters on the critical casting size of bulk metallic glass', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 40, pp. 2377 - 2387, http://dx.doi.org/10.1007/s11661-009-9929-7
2009
Laws KJ; Shamlaye K; Gun B; Ferry M, 2009, 'Synthesis of copper-based bulk metallic glasses in the ternary Cu-Mg-Ca system', Journal of Alloys and Compounds, vol. 486, pp. L27 - L29, http://dx.doi.org/10.1016/j.jallcom.2009.06.205
2009
Burgess T; Ferry M, 2009, 'Nanoindentation of metallic glasses', Materials Today, vol. 12, pp. 24 - 32, http://dx.doi.org/10.1016/S1369-7021(09)70039-2
2009
Quadir MZ; Al-Buhamad O; Lau KD; Quarfoth R; Bassman L; Munroe PR; Ferry M, 2009, 'The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets', International Journal of Materials Research, vol. 100, pp. 1705 - 1714, http://dx.doi.org/10.3139/146.110223
2009
Laws KJ; Ferry M; Burgess T, 2008, 'Effect of loading rate on the serrated flow of a bulk metallic glass during nanoindentation', ACTA Materialia, vol. 56, pp. 4829 - 4835, http://dx.doi.org/10.1016/j.actamat.2008.05.039
2008
Xu W; Ferry M, 2008, 'Comparison of recrystallization behaviour of cold deformed acicular ferrite produced by conventional processing and direct strip casting', Journal of Materials Processing Technology, vol. 203, pp. 518 - 525, http://dx.doi.org/10.1016/j.jmatprotec.2007.10.069
2008
Laws KJ; Gun B; Ferry M, 2008, 'Mechanical stability of Ca65Mg15Zn20 bulk metallic glass during deformation in the supercooled liquid region', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 480, pp. 198 - 204, http://dx.doi.org/10.1016/j.msea.2007.07.034
2008
Laws KJ; Gun B; Ferry M, 2008, 'Large-scale production of Ca65Mg15Zn20 bulk metallic glass samples by low-pressure die-casting', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 475, pp. 348 - 354, http://dx.doi.org/10.1016/j.msea.2007.04.059
2008
Hoffman MJ; Ferry M; Quadir MZ; Woiz A, 2008, 'Influence of processing parameters on the bond toughness of roll-bonded aluminium strip', Scripta Materialia, vol. 58, pp. 959 - 962, http://dx.doi.org/10.1016/j.scriptamat.2008.01.022
2008
Quadir MZ; Mateescu NM; Bassman L; Xu W; Ferry M, 2007, 'Three-dimensional morphology of microbands in a cold-rolled steel', Scripta Materialia, vol. 57, pp. 977 - 980, http://dx.doi.org/10.1016/j.scriptamat.2007.08.012
2007
Chen G; Ferry M, 2007, 'Crystallization and thermally induced surface relief effects in a Mg 65Cu25Y10 bulk metallic glass', Journal of Materials Science, vol. 42, pp. 646 - 651, http://dx.doi.org/10.1007/s10853-006-1140-2
2007
Gun B; Laws KJ; Ferry M, 2007, 'Elevated temperature flow behaviour of a Mg-based bulk metallic glass', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 471, pp. 130 - 134, http://dx.doi.org/10.1016/j.msea.2007.02.121
2007
Mateescu NM; Ferry M; Xu W; Cairney JM, 2007, 'Some factors affecting EBSD pattern quality of Ga+ ion-milled face centred cubic metal surfaces', Materials Chemistry and Physics, vol. 106, pp. 142 - 148, http://dx.doi.org/10.1016/j.matchemphys.2007.05.048
2007
Xu W; Ferry M; Mateescu NM; Cairney JM; Humphreys FJ, 2007, 'Techniques for generating 3-D EBSD microstructures by FIB tomography', Materials Characterization, vol. 58, pp. 961 - 967, http://dx.doi.org/10.1016/j.matchar.2006.10.001
2007
Quadir MZ; Ferry M; Al-Buhamad OH; Bassman L, 2007, 'Development of a recovered/recrystallized multilayered microstructure in Al alloys by accumulative roll bonding', ACTA Materialia, vol. 55, pp. 5438 - 5448, http://dx.doi.org/10.1016/j.actamat.2007.06.021
2007
Xu W; Ferry M; Cairney JM; Humphreys FJ, 2007, 'Three-dimensional investigation of particle-stimulated nucleation in a nickel alloy', ACTA Materialia, vol. 55, pp. 5157 - 5167, http://dx.doi.org/10.1016/j.actamat.2007.05.045
2007
Ferry M; Burhan N, 2007, 'Microstructural evolution in a fine-grained Al-0.3 wt.% Sc alloy produced by severe plastic deformation', Scripta Materialia, vol. 56, pp. 525 - 528, http://dx.doi.org/10.1016/j.scriptamat.2006.11.015
2007
Ferry M; Burhan N, 2007, 'Structural and kinetic aspects of continuous grain coarsening in a fine-grained Al-0.3Sc alloy', ACTA Materialia, vol. 55, pp. 3479 - 3491, http://dx.doi.org/10.1016/j.actamat.2007.01.047
2007
Laws KJ; Gun B; Ferry M, 2006, 'Effect of die-casting parameters on the production of high quality bulk metallic glass samples', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 425, pp. 114 - 120, http://dx.doi.org/10.1016/j.msea.2006.03.037
2006
Gun B; Laws KJ; Ferry M, 2006, 'Superplastic flow of a Mg-based bulk metallic glass in the supercooled liquid region', Journal of Non - Crystalline Solids, vol. 352, pp. 3896 - 3902, http://dx.doi.org/10.1016/j.jnoncrysol.2006.06.023
2006
Gang C; Ferry M, 2006, 'Crystallization of Mg-based bulk metallic glass', Transactions of Nonferrous Metals Society of China, vol. 16, pp. 833 - 837, http://dx.doi.org/10.1016/S1003-6326(06)60335-X
2006
Chen G; Ferry M, 2006, 'Some aspects of the fracture behaviour of Mg65Cu25Y10 bulk metallic glass during room-temperature bending', Journal of Materials Science, vol. 41, pp. 4643 - 4648, http://dx.doi.org/10.1007/s10853-006-0059-y
2006
Ferry M; Humphreys FJ, 2006, 'Onset of abnormal subgrain growth in cold rolled {1 1 0} [Left Angle Bracket] 0 0 1 [Right Angle Bracket] oriented copper single crystals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 435-436, pp. 447 - 452, http://dx.doi.org/10.1016/j.msea.2006.07.035
2006
Gun B; Laws KJ; Ferry M, 2006, 'Static and dynamic crystallization in Mg-Cu-Y bulk metallic glass', Journal of Non - Crystalline Solids, vol. 352, pp. 3887 - 3895, http://dx.doi.org/10.1016/j.jnoncrysol.2006.06.024
2006
Ferry M, 2005, 'Influence of fine particles on grain coarsening within an orientation gradient', ACTA Materialia, vol. 53, pp. 773 - 783, http://dx.doi.org/10.1016/j.actamat.2004.10.030
2005
Ferry M; Hamilton NE; Humphreys FJ, 2005, 'Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al-Sc alloy', ACTA Materialia, vol. 53, pp. 1097 - 1109, http://dx.doi.org/10.1016/j.actamat.2004.11.006
2005
Xu W; Ferry M; Wang Y, 2005, 'Influence of alloying elements on as-cast microstructure and strength of gray iron', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. A390, pp. 326 - 333, http://dx.doi.org/10.1016/j.msea.2004.08.030
2005
Ferry M; Munroe PR, 2004, 'Kinetics of Recrystallization and final grain size in an Al-based MMC.', Composites Part A - Applied Science and Manufacturing, vol. 35, pp. 1017 - 1025
2004
Ferry M; Xu W, 2004, 'Microstructural and crystallographic features of ausferrite in as-cast gray iron', Materials Characterization, vol. 53, pp. 43 - 49, http://dx.doi.org/10.1016/j.matchar.2004.07.008
2004
Ferry M; Munroe PR, 2004, 'Recrystallization kinetics and final grain size in a cold rolled particulate reinforced Al-based MMC', Composites Part A: Applied Science and Manufacturing, vol. 35, pp. 1017 - 1025, http://dx.doi.org/10.1016/j.compositesa.2004.03.014
2004
Hamilton NE; Ferry M, 2004, 'Grain growth in a nanocrystalline Al-Sc alloy', Materials Transactions, vol. 45, pp. 2264 - 2271, http://dx.doi.org/10.2320/matertrans.45.2264
2004
Xu W; Ferry M; Wang Y, 2004, 'The effect of ausferrite formation on the mechanical properties of gray iron', Scripta Materialia, vol. 51, pp. 705 - 709, http://dx.doi.org/10.1016/j.scriptamat.2004.06.008
2004
Ferry M; Munroe PR, 2003, 'Enhanced recovery in a particulate reinforced aluminium composite', Materials Science and Engineering A, vol. A358, pp. 142 - 151, http://dx.doi.org/10.1016/S0921-5093(03)00333-2
2003
Ferry M; Munroe PR, 2003, 'Recrystallized Grain Size Prediction in a Particulate Reinforced Metal Matrix Composite', Journal of Materials Science, vol. 38, pp. 1925 - 1930, http://dx.doi.org/10.1023/A:1023548329228
2003
Stanford N; Dunne DP; Ferry M, 2003, 'Effect of orientation stability on recrystallization textures of deformed aluminium single crystals', Materials Science and Engineering A, vol. 348, pp. 154 - 162, http://dx.doi.org/10.1016/S0921-5093(02)00748-7
2003
Stanford N; Dunne DP; Ferry M, 2003, 'Deformation and annealing of {110} oriented Al single crystals', ACTA Materialia, vol. 51, pp. 665 - 676, http://dx.doi.org/10.1016/S1359-6454(02)00445-7
2003
Hunter A; Ferry M, 2002, 'Texture enhancement by inoculation during direct casting of ferritic stainless steel strip', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 33A, pp. 1499 - 1507, http://dx.doi.org/10.1007/s11661-002-0072-y
2002
Hunter A; Ferry M, 2002, 'Evolution of microstructure and texture during casting of AISI 304 stainless steel strip', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 33A, pp. 3747 - 3754, http://dx.doi.org/10.1007/s11661-002-0247-6
2002
Hunter A; Ferry M, 2002, 'Comparative study of texture development in strip-cast ferritic and austenitic stainless steels', Scripta Materialia, vol. 47, pp. 349 - 355, http://dx.doi.org/10.1016/S1359-6462(02)00157-4
2002
Ferry M; Thompson M; Manohar PA, 2002, 'Decomposition of coarse grained austenite during accelerated cooling of C-Mn steels', ISIJ International, vol. 42, pp. 86 - 93, http://dx.doi.org/10.2355/isijinternational.42.86
2002
Manohar PA; Kunishige H; Chandra T; Ferry M, 2002, 'Continuous cooling transformation behaviour of Si-Mn and Al-Mn transformation induced plasticity steels', Materials Science and Technology, vol. 18, pp. 856 - 860, http://dx.doi.org/10.1179/026708302225004676
2002
Hunter A; Ferry M, 2002, 'Phase formation during solidification of AISI 304 austenitic stainless steel', Scripta Materialia, vol. 46, pp. 253 - 258, http://dx.doi.org/10.1016/S1359-6462(01)01215-5
2002
Ferry M; Stanford N, 2001, 'Observations using atomic force microscopy of surface relief associated with deformation in cube-oriented single crystals', Scripta Materialia, vol. 44, pp. 941 - 946, http://dx.doi.org/10.1016/S1359-6462(00)00681-3
2001
Ferry M; Yu D; Chandra T, 2001, 'Influence of hot deformation conditions on the annealing behaviour of a cold rolled ultra low carbon steel', ISIJ International, vol. 41, pp. 876 - 882, http://dx.doi.org/10.2355/isijinternational.41.876
2001
Ferry M; Page C, 2001, 'Microstructural control by secondary processing of strip-cast low carbon steel', Materials Science and Technology, vol. 17, pp. 1369 - 1376, http://dx.doi.org/10.1179/026708301101509575
2001
Thompson D; Ferry M; Manohar PA, 2001, 'Simulation of hot-band microstructure of C-Mn steels during high speed cooling', ISIJ International, vol. 41, pp. 891 - 899, http://dx.doi.org/10.2355/isijinternational.41.891
2001
Ferry M; Muljono D; Dunne DP, 2001, 'Influence of heating rate on anisothermal recrystallization in low and ultra low carbon steels', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 303, pp. 90 - 99, http://dx.doi.org/10.1016/S0921-5093(00)01882-7
2001
Ferry M; Muljono D; Dunne DP, 2001, 'Recrystallization kinetics of low and ultra low carbon steels during high-rate annealing', ISIJ International, vol. 41, pp. 1053 - 1060, http://dx.doi.org/10.2355/isijinternational.41.1053
2001
Huang Y; Humphreys FJ; Ferry M, 2000, 'The annealing behaviour of deformed cube-oriented aluminium single crystals,', ACTA Materialia, vol. 48, pp. 2543 - 2556, http://dx.doi.org/10.1016/S1359-6454(00)00068-9
2000
Huang Y; Humphreys FJ; Ferry M, 2000, 'Hot deformation and annealing in cube-oriented single crystals,', Materials Science and Technology, vol. 16, pp. 1367, http://dx.doi.org/10.1179/026708300101507271
2000
Manohar PA; Ferry M; Hunter A, 2000, 'Direct strip casting of steel - historical perspective and future direction', Materials Forum, vol. 24, pp. 19 - 36
2000
Manohar PA; Ferry M, 1999, 'Grain growth in particle-containing metastable microstructures', Materials Science Forum, vol. 312, pp. 455 - 460
1999
Manohar PA; Shivathaya SS; Ferry M, 1999, 'Design of an expert system for the optimization of steel compositions and process route', Expert Systems with Applications, vol. 17, pp. 129 - 134, http://dx.doi.org/10.1016/S0957-4174(99)00030-5
1999
Manohar PA; Ferry M, 1999, 'Grain Growth in Particle-Containing Metastable Microstructures', Journal of Metastable and Nanocrystalline Materials, vol. 2-6, pp. 455 - 462, http://dx.doi.org/10.4028/www.scientific.net/jmnm.2-6.455
1999
Manohar PA; Ferry M; Chandra T, 1998, 'Five Decades of the Zener Equation', ISIJ International, vol. 38, pp. 913 - 924, http://dx.doi.org/10.2355/isijinternational.38.913
1998
Humphreys FJ; Ferry M, 1997, 'Applications of electron backscattered diffraction to studies of annealing of deformed metals', Materials Science and Technology, vol. 13, pp. 85 - 90, http://dx.doi.org/10.1179/mst.1997.13.1.85
1997
Ferry M; Jones D, 1997, 'High-rate annealing of single-phase and particle-containing aluminium alloys', Scripta Materialia, vol. 38, pp. 177 - 183, http://dx.doi.org/10.1016/S1359-6462(97)00498-3
1997
Humphreys FJ; Ferry M; Brough I; Johnson CP, 1996, 'Combined in Situ Sem Annealing and Ebsd of Deformed Materials', Textures and Microstructures, vol. 26, pp. 281 - 301, http://dx.doi.org/10.1155/tsm.26-27.281
1996
Ferry M; Humphreys FJ, 1996, 'The deformation and recrystallization of particle-containing {011}<100> aluminium crystals', Acta Materialia, vol. 44, pp. 3089 - 3103, http://dx.doi.org/10.1016/1359-6454(95)00432-7
1996
Humphreys FJ; Ferry M, 1996, 'On the role of twinning in the recrystallization of aluminium', Scripta Materialia, vol. 35, pp. 99 - 105, http://dx.doi.org/10.1016/1359-6462(96)00105-4
1996
Ferry M; Humphreys FJ, 1996, 'Discontinuous subgrain growth in deformed and annealed {110}<001> aluminium single crystals', Acta Materialia, vol. 44, pp. 1293 - 1308, http://dx.doi.org/10.1016/1359-6454(95)00316-9
1996
Humphreys FJ; Ferry M, 1996, 'Combined in-situ annealing and EBSD of deformed aluminium alloys', Materials Science Forum, vol. 217-222, pp. 529 - 534, http://dx.doi.org/10.4028/www.scientific.net/msf.217-222.529
1996
Ferry M; Humphreys FJ, 1996, 'The deformation and recrystallization of particle-containing single crystals', Materials Science Forum, vol. 217-222, pp. 493 - 498, http://dx.doi.org/10.4028/www.scientific.net/msf.217-222.493
1996
Ferry M; Munroe PR, 1995, 'The effect of subgrain size on the static recrystallization behaviour of aluminium-based metal-matrix composite', Scripta Metallurgica et Materialia, vol. 33, pp. 857 - 862, http://dx.doi.org/10.1016/0956-716X(95)00319-Q
1995
Ferry M; Munroe PR, 1995, 'Hot working behaviour of Al/Al203 particulate reinforced metal matrix composite', Materials Science and Technology, vol. 11, pp. 633 - 641
1995
Ferry M; Munroe PR, 1995, 'Microstructure and kinetics of recrystallization of an Al/Al203 particulate reinforced metal matrix composite following hot deformation', Materials Science and Technology, vol. 11, pp. 734 - 740
1995
Ferry M; Munroe PR, 1995, 'Microstructure and kinetics of recrystallisation of hot deformed Al-Al2O3 particulate reinforced metal matrix composite', Materials Science and Technology (United Kingdom), vol. 11, pp. 734 - 740, http://dx.doi.org/10.1179/mst.1995.11.8.734
1995
Ferry M; Munroe PR, 1994, 'The effect of matrix temper on particulate integrity in an Al Al2O3 metal matrix composite', Scripta Metallurgica et Materiala, vol. 31, pp. 143 - 148, http://dx.doi.org/10.1016/0956-716X(94)90165-1
1994
Ferry M; Munroe PR; Crosky A, 1993, 'The effect of processing parameters on the recrystallized grain size and shape of a particulate reinforced metal matrix composite', Scripta Metallurgica et Materiala, vol. 29, pp. 741 - 746, http://dx.doi.org/10.1016/0956-716X(93)90219-I
1993
Ferry M; Munroe PR; Crosky A, 1993, 'Grain growth of an aluminium 2014 Al2O3 PMMC during solution heat treatment', Scripta Metallurgica et Materiala, vol. 28, pp. 1235 - 1240, http://dx.doi.org/10.1016/0956-716X(93)90460-A
1993
Ferry M; Munroe P; Crosky A; Chandra T, 1992, 'Microstructural development during cold deformation and recrystallisation of 2014 AI–AI2O3 particulate composite', Materials Science and Technology (United Kingdom), vol. 8, pp. 43 - 51, http://dx.doi.org/10.1179/026708392790169894
1992
Ferry M; Kennon NF; Dunne DP, 1991, 'Shape Strains Associated with Forward and Reverse Martensitic Transformation in a Cu-Al-Ni Shape Memory Alloy', Materials Science Forum, vol. 56-58, pp. 435 - 440, http://dx.doi.org/10.4028/www.scientific.net/msf.56-58.435
1991
Conference Papers
add
Wahid MFM; Laws KJ; Ferry M, 2020, 'Crystallization kinetics and fragility of al-based amorphous alloy', in Materials Science Forum, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/MSF.1010.3
2020
Tang C; Xu W; Yi J; Ferry M, 2019, 'Factors Affecting Temperature Rise in Shear Bands in a Simulated CuZr Metallic Glass', pp. 350 - 351, http://dx.doi.org/10.1007/978-3-319-91989-8_80
2019
Fitri MWM; Laws KJ; Ferry M, 2018, 'Structural study of Al-based amorphous alloy', in AIP Conference Proceedings, http://dx.doi.org/10.1063/1.5080919
2018
Duan JQ; Quadir MZ; Ferry M, 2017, 'Microstructure and texture evolution in nickel during accumulative roll bonding', in Materials Science Forum, pp. 454 - 458, http://dx.doi.org/10.4028/www.scientific.net/MSF.879.454
2017
Conway PLJ; Shaw AL; Bassman L; Ferry M; Laws KJ, 2017, 'Stabilisation of disordered bcc phases in magnesium-rare earth alloys', in Minerals, Metals and Materials Series, pp. 497 - 503, http://dx.doi.org/10.1007/978-3-319-52392-7_68
2017
Quadir MZ; Duan JQ; Xu W; Ferry M, 2017, 'Structural Refinement, Recrystallization and Grain Growth Phenomena in an Accumulative Roll Bonded Nickel Sheet', in Procedia Engineering, pp. 30 - 34, http://dx.doi.org/10.1016/j.proeng.2017.04.067
2017
Laws KJ; Shamlaye KF; Loeffler JF; Ferry M, 2016, 'DEVELOPMENTS IN HIGH MAGNESIUM-CONTENT BULK METALLIC GLASSES AND FUTURE POSSIBILITIES', in Singh A; Solanki K; Manuel MV; Neelameggham NR (eds.), MAGNESIUM TECHNOLOGY 2016, JOHN WILEY & SONS INC, Nashville, TN, pp. 13 - 14, presented at Magnesium Technology Symposium held during the 145th TMS Annual Meeting and Exhibition, Nashville, TN, 14 February 2016 - 18 February 2016, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000579364900005&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2016
Wang F; Laws K; Martinez D; Trujillo CP; Brown AD; Cerreta EK; Hazell PJ; Ferry M; Quadir MZ; Jiang J; Escobedo-Diaz JP, 2015, 'Effects of chemical composition and test conditions on the dynamic tensile response of Zr-based metallic glasses', in AIP Conference Proceedings 2017, American Institute of Physics, Tampa Bay, Florida, presented at SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, Tampa Bay, Florida, 14 June 2015 - 19 June 2015, http://dx.doi.org/10.1063/1.4971656
2015
Escobedo-Diaz JP; Chapman DJ; Laws KJ; Brown AD; Wang F; Eakins D; Hazell PJ; Ferry M, 2015, 'Effects of chemical composition on the shock response of Zr-based metallic glasses', in AIP Conference Proceedings 2017, American Institute of Physics, Tampa Bay, Florida, presented at SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, Tampa Bay, Florida, 14 June 2015 - 19 June 2015, http://dx.doi.org/10.1063/1.4971657
2015
Ferry M; Quadir MZ; Afrin N; Xu W; Loeb A; Soe B; McMahon C; George C; Bassman L, 2015, 'Uncovering the true nature of deformation microstructures using 3D analysis methods', in IOP Conference Series: Materials Science and Engineering, http://dx.doi.org/10.1088/1757-899X/89/1/012002
2015
Duan JQ; Quadir MZ; Ferry M, 2015, 'An ebsd study of nickel sheets after unidirectional and cross rolling arb processings', in Materials Science and Technology Conference and Exhibition 2015, MS and T 2015, pp. 835 - 842
2015
Biletska O; Laws KJ; Gibson M; Ferry M, 2014, 'Production of mg-based bulk metallic glass composites with high magnesium content', in Materials Science Forum, pp. 263 - 267, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.263
2014
Shamlaye KF; Laws KJ; Ferry M, 2014, 'Fabrication of bulk metallic glass composites at low processing temperatures', in Materials Science Forum, pp. 461 - 465, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.461
2014
Cao Y; Laws K; Ferry M, 2014, 'Optimization of glass forming ability of Al-Ni-Si alloys by a thermodynamic and kinetic approach', in Materials Science Forum, pp. 466 - 470, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.466
2014
Loeb A; Soe B; McMahon C; Ferry M; Bassman L, 2014, 'Identification and characterization of subgrain features in 3D EBSD data', in 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science, pp. 9 - 14, http://dx.doi.org/10.1002/9781118990278.ch2
2014
Wahid MFM; Laws KJ; Ferry M, 2013, 'Effect of transition metals in the development of Al-Cu-Mg based metallic glass', in Materials Research Innovations, http://dx.doi.org/10.1179/1432891713Z.000000000310
2013
Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of bulk metallic glass composite with high magnesium content', in TMS Annual Meeting, Minerals, Metals & Materials Society, San Antonio, TX; United States, pp. 247 - 252, presented at 142nd Annual Meeting and Exhibition: Linking Science and Technology for Global Solutions, TMS 2013, San Antonio, TX; United States, 03 March 2013 - 07 March 2013
2013
Shamlaye KF; Laws KJ; Ferry M, 2013, 'Bulk metallic glass composites fabricated within the supercooled liquid region', in 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, pp. 3221 - 3228, http://dx.doi.org/10.1002/9781118792148.ch397
2013
Quadir MZ; Ferry M; Munroe PR, 2012, 'Crystallography of the low angle lamellar band boundaries in ARB-processed aluminum sheet', in Materials Science Forum, Trans Tech Publications Ltd, pp. 161 - 164, http://dx.doi.org/10.4028/www.scientific.net/MSF.702-703.161
2012
Ferry M; Xu W; Quadir MZ; Zinnia N; Afrin Zinnia N; Mateescu NM; Laws KJ; Robin L; Bassman LC; Cairney JW; Humphreys J; Albou A; Driver JH, 2012, '3D-EBSD Studies of Deformation, Recrystallization and Phase Transformations', in Materials Science Forum, Trans Tech Publications Ltd, pp. 41 - 50, http://dx.doi.org/10.4028/www.scientific.net/MSF.715-716.41
2012
Soe B; McMahon C; Golay D; Quadir MZ; Ferry M; Bassman L, 2012, 'Subgrain boundary identification in 3D EBSD data through fast multiscale clustering', in 1st International Conference on 3D Materials Science 2012, 3DMS 2012, pp. 189 - 194, http://dx.doi.org/10.1007/978-3-319-48762-5_29
2012
Xu W; Robin L; Laws KJ; Zheng R; Ferry M, 2011, 'The redistribution and alignment of crystalline flakes in a bulk metallic glass composite during thermoplastic forming', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 971 - 974, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011, http://dx.doi.org/10.4028/www.scientific.net/MSF.702-703.971
2011
Retraint D; Quadir MZ; Xu W; Waltz L; Ferry M, 2011, 'Microstructural investigation of co-rolled nanocrystalline stainless steel sheets', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 127 - 130, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011, http://dx.doi.org/10.4028/www.scientific.net/MSF.702-703.127
2011
Cao Y; Laws K; Kirkland N; Boughton P; McLennan S; Birbilis N; Ferry M, 2011, 'Magnesium-based bio-absorbable metallic glasses', in 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials
2011
Bassman L; George C; Quadir MZ; Afrin N; Liu B; Soe B; Ferry M, 2011, 'Study of the true nature of microband boundaries in aluminum with 3D EBSD', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 558 - 561, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011, http://dx.doi.org/10.4028/www.scientific.net/MSF.702-703.558
2011
Quadir MZ; Al-Buhamad OH; Ferry M, 2011, 'The Mechanical Performance of ARB Fabricated Hybrid Lamellar Composite of Recovered/Recrystallized Al and Precipitation Hardened Al(Sc) Layers', in Materials Science Forum, Trans Tech Publications Ltd, pp. 481 - 486, http://dx.doi.org/10.4028/www.scientific.net/MSF.667-669.481
2011
Afrin N; Quadir MZ; Bassman L; Driver JH; Albou A; Ferry M, 2011, 'On the bumps and curves in the microband boundaries in a channel-die compressed Goss-oriented Ni single crystal', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 101 - 104, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011, http://dx.doi.org/10.4028/www.scientific.net/MSF.702-703.101
2011
Ferry M; Quadir MZ; Afrin N; Bassman L; George C; McMahon C; Xu W; Laws KJ, 2011, 'The application of 3D-EBSD for investigating texture development in metals and alloys', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 469 - 474, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011, http://dx.doi.org/10.4028/www.scientific.net/MSF.702-703.469
2011
Xu W; Ferry M, 2010, 'The study of nucleation behaviour in IF steel by 3D EBSD', in Materials Science Forum, Trans Tech Publications Ltd, pp. 2334 - 2337
2010
Laws KJ; Shamlaye K; Gun B; Wong K; Ferry M, 2010, 'The prediction of glass-forming compositions in metallic systems – the development of new bulk metallic glasses', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1637 - 1641, http://dx.doi.org/10.4028/www.scientific.net/MSF.638-642.1637
2010
Xu W; Ferry M, 2010, 'The study on the nucleation behaviours in IF steel by 3-D EBSD tomography', in Materials Science Forum, pp. 2334 - 2337, http://dx.doi.org/10.4028/www.scientific.net/MSF.654-656.2334
2010
Lau K; Quadir MZ; Ferry M, 2009, 'Shearing behaviour and texture evolution in aluminium sheet deformed by accumulative roll bonding', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, pp. 575 - 578, presented at 4th International Light Metals Technology Conference, Gold Coast, 29 June 2009 - 01 July 2009, http://dx.doi.org/10.4028/www.scientific.net/MSF.618-619.575
2009
Al-Buhamad OH; Quadir MZ; Ferry M, 2009, 'Mechanical properties of an accumulative roll bonded aluminium alloy composite', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, pp. 551 - 554, presented at 4th International Light Metals Technology Conference, Gold Coast, 29 June 2009 - 01 July 2009, http://dx.doi.org/10.4028/www.scientific.net/MSF.618-619.551
2009
Quarfoth R; Quadir MZ; Ferry M; Bassman L, 2009, 'Finite element model of compression of a polycrystalline layer showing banding behavior', in E-Voting and Identity, Springer, Berlin / Heidelberg, pp. 661 - 667, presented at E-Voting and Identity, 2nd International Conference, VOTE-ID 2009, Luxembourg, 07 September 2009 - 08 September 2009
2009
King KJ; Liu BH; Quadir MZ; Ferry M; Bassman L, 2009, 'Novel method for identifying low-angle sub-grain boundaries', in E-Voting and Identity, Springer, Berlin / Heidelberg, pp. 669 - 676, presented at E-Voting and Identity, 2nd International Conference, VOTE-ID 2009, Luxembourg, 07 September 2009 - 08 September 2009
2009
Quadir MZ; Ferry M; Al-Buhamad OH; Bassman L, 2008, 'Texture randomization by intense shearing in layered Al and Al (0.3%Sc) ARB-processed sheet', in Materials processing and texture, Wiley, Hoboken, N.J. USA, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
2008
Al-Buhamad OH; Quadir MZ; Ferry M, 2008, 'Some aspects on grain growth in ECAP deformed and heat treated Aluminium 1.2% Hafnium alloy', in Applications of texture analysis, Wiley, Hoboken, N.J. USA, pp. 709 - 716, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
2008
Quadir MZ; Al-Buhamad OH; Bassman L; Ferry M, 2008, 'Texture Randomization by Intense Shearing in Layered Al And Al(0.3%Sc) ARB Processed Sheet', in Ceramic Transactions, Pittsburgh, PE, USA, pp. 783 - 790, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
2008
Al-Buhamad OH; Quadir MZ; Bassman L; Ferry M, 2008, 'Some Aspects of Grain Coarsening in an ECAP-Deformed and Heat Treated Al-1.2%Hf Alloy', in Some Aspects of Grain Coarsening in an ECAP-Deformed and Heat Treated Al-1.2%Hf Alloy, 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
2008
Xu W; Ferry M, 2007, 'Study of the early stages of recrystallization in a cold rolled ELC steel using FIB-EBSD tomography', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, pp. 2013 - 2016, presented at 16th International Conference on Textures of Materials
2007
Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature characteristics of Ca65 Mg15 Zn20 bulk metallic glass', in Materials Forum, Institute of Materials Engineering, Australasia Ltd, pp. 132 - 135
2007
Xu W; Ferry M, 2007, 'Recrystallization behaviour of cold rolled low carbon stel strip with various starting microstructures', in Materials Science Forum, Trans Tech Publications Ltd, pp. 419 - 424
2007
Yeung WY; Wuhrer R; Cortie M; Ferry M, 2007, 'Equal channel angular extrusion of high purity gold', in Materials Forum, Institute of Materials Engineering, Australasia Ltd, pp. 31 - 35
2007
Xu W; Ferry M; Cairney JM; Humphreys J, 2007, 'Application of FIB-EBSD tomography for understanding annealing phenomena in a cold rolled particle-containing nickel alloy', in Materials Science Forum, Trans Tech Publications Ltd, pp. 413 - 418
2007
Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature properties of Ca65 Mg15 Zn20 bulk metallic glass', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1263 - 1266
2007
Ferry M; Xu W; Mateescu NM; Cairney JM; Humphreys J, 2007, 'On the viabilty of FIB tomography for generating 3-D orientation maps in deformed and annelaed metals', in Materials Science Forum, Trans Tech Publications Ltd, pp. 55 - 64, http://dx.doi.org/10.4028/0-87849-434-0.55
2007
Ferry M; Burhan N, 2007, 'Statistical aspects of grain coarsening in a fine-grained Al-Sc alloy', in Materials Science Forum, Trans Tech Publications Ltd, pp. 729 - 734
2007
Ferry M; Bassman L; Al-Buhamad OH; Quadir MZ, 2007, 'Formation of recrystallized and recovered multilayered microstructure in a hybrid aluminium alloy, PRICM-6 conference', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, pp. 131 - 134, presented at 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, 05 November 2007 - 09 November 2007
2007
Ferry M; Al-Buhamad OH; Quadir MZ, 2007, 'Processing of multi-layered Al-Al(Sc)hybrid sheet by accumulative roll boding', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, pp. 307 - 312, presented at 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, 05 November 2007 - 09 November 2007
2007
Quadir MZ; Al-Buhamad OH; Ferry M, 2007, 'Hard and Soft Layered Composite By Accumulative Roll Bonding (ARB)', in Materials Science Forum, Trans Tech Publications Ltd, pp. 307 - 312
2007
Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature deformation characteristics of Ca65Mg15Zn20 bulk metallic glass', in Materials Forum, pp. 132 - 135
2007
Ferry M, 2006, 'Spatial uniformity of the rate of grain coarsening in a submicron Al-Sc alloy produced by severe plastic deformation', in Materials Science Forum, Trans Tech Publications Ltd, pp. 251 - 256
2006
Burhan N; Ferry M, 2006, 'Changes in grain size distribution of a submicron grained Al-Sc alloy during high temperature annealing', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1617 - 1622
2006
Laws KJ; Gun B; Ferry M, 2006, 'Production of high quality bulk metallic glass components by low pressure die Casting', in 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, pp. 119 - 126, presented at 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, 12 March 2006 - 16 March 2006
2006
Laws KJ; Gun B; Ferry M, 2006, 'Elevated temperature mechanical behaviour of Mg-based amorphous alloys produced by low-pressure die-casting', in 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, pp. 51 - 56, presented at 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, 12 March 2006 - 16 March 2006
2006
Ferry M, 2005, 'Uniformity of grain coarsening in a submicron grained Al-Sc alloy containing local variations in texture', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, pp. 609 - 614, presented at 14th International Conference on Textures of Materials, Leuven, Belgium, 11 July 2005 - 14 July 2005
2005
Ferry M; Humphreys FJ, 2005, 'A study of the early stages of recovery in cold rolled {110} oriented copper single crystals', in Materials Science Forum, Trans Tech Publications Ltd, pp. 761 - 766
2005
Xu W; Ferry M, 2005, 'Influence of starting microstructure on texture development in cold rolled and annealed low carbon steel strip', in Materials Science Forum, Trans Tech Publications Ltd, pp. 519 - 524
2005
Marceau RK; Ferry M, 2004, 'Hot tensile ductility and dynamic grain growth in Al-Sc and Al-Mg-Sc alloys', in 9th International conference on aluminium alloys ( ICAA-9), 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, presented at 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, 02 August 2004 - 05 August 2004
2004
Hamilton NE; Ferry M; Hamilton , 2004, 'Particle pinning in a nanocrystalline Al-Sc alloy', in 9th International conference on aluminium alloys ( ICAA-9), 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, presented at 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, 02 August 2004 - 05 August 2004
2004
Hamilton NE; Burhan N; Ferry M; Hamilton , 2004, 'Grain growth inhibition in a nanocrystalline AI-Sc alloy', in Zhu YT (ed.), Ultrafine grained Materials III, Charlotte, North Carolina, USA, pp. 635 - 640, presented at Ultrafine grained Materials III, Charlotte, North Carolina, USA, 14 March 2004 - 18 March 2004, http://www.sciencedirect.com/science/article/B6WPV-4CWS48R-PF/2/03d52d161489657ecb859c09cc7a3bbb
2004
Ferry M; Hunter A, 2002, 'Factors affecting the fibre texture in strip-cast stainless steels', in 13th International Conference on Textures of Materials, Seoul, South Korea, pp. 1395 - 1400, presented at 13th International Conference on Textures of Materials, Seoul, South Korea, 24 August 2002 - 28 August 2002
2002
Ferry M; Munroe PR, 2002, 'Recrystallized grain size in particulate reinforced metal matrix composites', in ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, Sydney, presented at ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, Sydney, 21 July 2002 - 25 July 2002
2002
Ferry M, 2002, 'mechanism of discontinuous subgrain growth in aluminium', in 13th International Conference on Textures of Materials, 13th International Conference on Textures of Materials, Seoul, South Korea, presented at 13th International Conference on Textures of Materials, Seoul, South Korea, 24 August 2002 - 28 August 2002
2002
Ferry M, 2002, 'Mechanism of discontinuous subgrain growth in as-deformed aluminium single crystals', in Materials Science Forum, pp. 979 - 984, http://dx.doi.org/10.4028/www.scientific.net/msf.408-412.979
2002
Hunter A; Ferry M; Strezov L, 2001, 'Variables Affecting the Microstructure and Texture of as-cast aisi 304 stainless steel strip', in 6th World Congress of Chemical Engineering, 6th Workd Congress of Chemical Engineering, Melbourne, presented at 6th Workd Congress of Chemical Engineering, Melbourne, 23 September 2001 - 26 September 2001
2001
Hunter A; Ferry M, 2001, 'Ferrite Distribution in as-cast AISI 304 Austenitic Stainless Steel Strip', in 6th World Congress of Chemical Engineering, 6th Workd Congress of Chemical Engineering, Melbourne, presented at 6th Workd Congress of Chemical Engineering, Melbourne, 23 September 2001 - 26 September 2001
2001
Ferry M; Hunter A; Strezov L; Mukunthan K, 2001, 'Influence of titanium inoculation on the microstructure of as-cast ferritic stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, 01 September 2001
2001
Ferry M; Stanford N; Dunne DP, 2001, 'Periodic nucleation of recrystallized grains in deformed Al single crystals', in Gottstein G; Molodov DA (ed.), 1st Joint International Conference on Recrystallization and Grain Growth, 1st Joint International Conference on Recrystallization and Grain Growth, Germany, pp. 861 - 866, presented at 1st Joint International Conference on Recrystallization and Grain Growth, Germany, 01 August 2001
2001
Ferry M, 2001, 'Solidification behaviour of as-cast AISI 304 austenitic stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, 01 September 2001
2001
Ferry M, 2001, 'Phase formation in as-cast AISI 304 stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, 01 September 2001
2001
Ferry M, 2001, 'Secondary processing of strip-cast low carbon steel', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, 01 September 2001
2001
Stanf ; Ferry M, 2000, 'Critical criterion for particle stimulated nucleation after hot deformation of an Al-Si alloy, C24', in 21st International Ris? Symposium on Materials Science, 21st International Ris? Symposium on Materials Science, presented at 21st International Ris? Symposium on Materials Science, 01 January 2000
2000
Manohar PA; Shivathaya SS; Ferry M; Chandra T, 1999, 'Development of an integrated system for designing steelmaking aim compositions', in Proceedings of the 2nd International Conference on Intelligent Processing and Manufacturing of Materials, IPMM 1999, pp. 105 - 110, http://dx.doi.org/10.1109/IPMM.1999.792459
1999
Muljono D; Ferry M; Dunne DP, 1997, 'High-rate induction annealing of cold rolled low carbon steel sheet', in Mechanical Working and Steel Processing Conference Proceedings, pp. 667 - 672
1997
Ferry M; Munroe PR; Crosky A; Chandra T, 1993, 'Effect of particulate distribution on the grain size distribution in an aluminum 2014/Al2O3 PMMC', in Proceedings of the International Conference on Advanced Composite Materials, pp. 1259 - 1264
1993
Software / Code
add
Hamilton NE; Ferry M, 2018, ggtern: An Extension to 'ggplot2', for the Creation of Ternary Diagrams, CRAN, https://cran.r-project.org/web/packages/ggtern/index.html, Plotting Software, Published: 19 December 2018, Software / Code, http://ggtern.com/
2018
Conference Presentations
add
Mahjoub R; laws ; ferry , 2017, 'Hydrogen and amorphous alloys: friends or foes?', presented at RQ16, Leoben, Austria, 27 August 2017 - 01 September 2017, http://rq16.unileoben.ac.at/de/5774/
2017
Mahjoub R; Laws KJ; Ferry M, 2014, 'Ab initio Calculation of Configurational and Vibrational Entropies of Amorphous Alloys', presented at 3rd biennial conference of the Combined Australian Materials Societies, Sydney, Australia, 26 November 2014 - 28 November 2014
2014
Conference Abstracts
add
Wang F; Laws KJ; Trujillo CP; Brown AD; Cerreta EK; Hazell PJ; Quadir MZ; Ferry M; Escobedo JP, 2015, 'Effects of chemical composition and test conditions on the dynamic tensile response of Zr-based metallic glasses', in APS Shock Compression of Condensed Matter Meeting Abstracts, Vol. 1, pp. 1051 - 1051, http://dx.doi.org/10.1063/1.4971656
2015
Brown AD; Wang F; Laws KJ; Eakins D; Chapman DJ; Hazell PJ; Ferry M; Escobedo JP, 2015, 'Effect of chemical composition on the shock response of Zr-based metallic glasses', in APS Shock Compression of Condensed Matter Meeting Abstracts, Vol. 1, pp. 6002 - 6002, http://dx.doi.org/10.1063/1.4971657
2015
Books
add
Ferry M, 2006, Direct Strip Casting of Metals and Alloys, CRC Press & woodhead limited, Cambridge, UK, http://dx.doi.org/10.1533/9781845691660
2006
  • International Expert, Plan 111 International Advanced Light Metals Innovation Center, Shanghai Jiao Tong University (2016-21)
  • Baosteel Talent Development Institute Professor (2013-16)
  • Outstanding Collaborative Research Award, Baosteel Research Institute, China (2017)
  • Outstanding Product Development Award, Ruipa Technology (2016)
  • Outstanding Contribution Award: Australia-China Symposium on Biomaterials and Applications, Xi'an, China (2013)
  • CNRS Fellowship, École Nationale Supérieure des Mines de Saint-Étienne, France (2009-10)
  • EPSRC Fellowship, School of Materials, University of Manchester, UK (2004)
  • UNSW European Fellowship, University of Cambridge, UK (2002)
  • Institute of Materials Engineering Australia Meritorious Service Award (1998)

I have received funding over the years from the Australian Research Council (ARC) and other sources for research projects and centres. ARC LIEF funding has also been received for a broad range of processing and characterisation facilities for understanding the structure and properties of materials.

ARC Discovery Grants (exc. ARC COE program grants from 2005-14)

  • Unlocking the diverse property profile of Mg alloys via microstructural engineering (2019-22)
  • An integrated crystallographic approach to understanding annealing mechanisms (2018-21)
  • Ultra-lightweight alloys with unique multi-dimensional property profiles (2015-17)
  • A new class of poly-amorphous alloy exhibiting outstanding damage tolerance (2012-14)
  • The nature of internal interfaces in annealed metals by 3-D FIB tomography (2009-11)
  • 3-D study of internal interface boundaries in annealed metals by FIB tomography (2005-07)
  • Thermal stability of nanocrystalline alloys produced by severe plastic straining (2003-05)
  • Texture enhancement by inoculation in as-cast metallic strip (2002-04)

ARC Linkage Grants

  • Reducing the environmental impact of passenger vehicles using lightweight alloy components, with Cold Forge (2015-17)
  • Reducing the environmental impact of steel making through direct strip casting, with Baosteel (2012-15)
  • Atomic-scale insights into interfaces in ultrafine-grained low-solute alloys, with Prof. Cairney (USyd) & Zeiss Ltd (2012-14)
  • The design of die-castable bulk metallic glasses exhibiting superior mechanical performance, with CJC Ltd Korea (2012-14)
  • High resolution EBSD of fine grained alloys (2004-05)
  • Silicon on sapphire using solid-phase epitaxial techniques, with Perigrine Electronics (2003-05)
  • Optimising the formability of strip-cast low carbon steel, with BlueScope Steel (2002-04)
  • The peritectic reaction and surface quality of continuous cast steel, with BlueScope Steel (2000-02)
  • Cast structure development during simulation of thin-slab casting, with BHP Research (1999-01)
  • Texture and formability of ultra-low carbon steel, with BHP Billiton (1997-99)
  • Microstructure and texture of strip-cast steels, with BHP Billiton (1997-99)

ARC LIEF Grants (multiple chief investigators)

  • A 4-D X-Ray Microscopy Laboratory (2020)
  • An upgraded nanoindenter facility with in-situ Raman at high temperature (2020)
  • Maintaining Intersect member access to the NCI peak supercomputing facility (2017)
  • Distributed memory cluster (2016)
  • High temperature atomic structure and physical property analysis facility (2015)
  • Quench and deformation dilatometer for studying materials science (2014)
  • Renew Intersect consortium's share of NCI’s peak facility (2014)
  • Thermomechanical processing facility for the light metals (2013)
  • Joint processing facility for the production of far-from-equilibrium alloy structures (2012)
  • National in-situ transmission electron microscopic facilities (2012)
  • Dynamic Phase Behaviour Characterisation Facility for Nanostructured Interfaces (2011)
  • High-temperature probes for investigating phase transitions (2010)
  • FIB / SEM for Nanometre Scale Characterisation and Fabrication (2010)
  • A National Facility for Light Metal Powder Processing (2008)
  • High-Resolution Field Emission Scanning Electron Microscopy (FESEM) Platform (2008)
  • Laser Flash Thermophysical Properties Analyser (2007)
  • Near Net Shaped Casting and Alloy Development Facility (2007)
  • Combinatorial deposition and characterization facility for alloy thin film materials (2006)
  • Surface mechanical property analysis facility (2005)
  • Advanced deformation simulation laboratory (2005)
  • Mechanical property investigation facility for development of advanced materials (2000)

Membership of Local & International Centres, Hubs & Institutes

  • UNSW Centre for Advanced Solid and Liquid based Electronics and Optics (2020- )
  • UNSW Materials and Manufacturing Futures Institute (2018- )
  • SJTU International Light Metals Innovation Center (2016-21)
  • UNSW-SJTU Innovation Hub (2015-18)
  • Baosteel-Australia Joint Research Centre (2012-)
  • Australia-China Research Centre for Light Metals (2013-15)
  • Australia-China Joint Research Centre For Minerals, Metallurgy and Materials (2013-15)
  • ARC Centre of Excellence for Design in Light Metals (2005-14)
  • ARC Research Network for Advanced Materials (2004-06)
  • BHP-UoW Steel Research Institute (1996-2000)

International Student Exchange Education Grants

  • National Science Foundation IRES Grant: NSF#1261525 (2013-16)
  • National Science Foundation IRES Grant: NSF#1357113 (2014-17)
  • National Science Foundation IRES Grant: NSF#1129412 (2011-14)
  • NSF Materials World Network Grant: NSF#0807240 (2008-12) 

Mechanisms of microstructure and texture evolution during solidification, solid-state phase transformation and deformation & annealing with particular emphasis on agile manufacturing processes.

  • Physical Properties of Materials
  • Thermodynamics & Phase Equilibria
  • Crystallography & X-ray Diffraction
  • Dislocation Mechanisms
  • Phase Transformations
  • Thermomechanical Processing
  • Crystallographic Texture & Properties